Project

General

Profile

Activity

From 06/01/2017 to 06/30/2017

06/29/2017

09:40 PM Developer: RE: new video uploaded
*+1* from me ! sadosp
08:05 PM Developer: RE: new video uploaded
Thanks Nir, great video as always:) foft
06:08 PM Developer: new video uploaded
https://www.youtube.com/watch?v=7wHHSnh7MHo ndary
08:05 PM Developer: RE: Holy shit - Joe Decuir has en Eclaire
Yes it's true, Joe has one and will be helping out as time allows. foft
02:23 AM Developer: Holy shit - Joe Decuir has en Eclaire
Joe Decuir posted a response to Nir's video https://www.youtube.com/watch?v=7wHHSnh7MHo
Amazing news!!
Stephen
06:22 PM Developer: RE: Which case are you getting?
i got a clear case for the Eclaire ndary

06/21/2017

07:53 PM Developer: RE: How to check core version?
I don't have a method for this yet, but yeah would be useful.
The closest right now would be to read the flash chi...
foft
02:19 PM Developer: How to check core version?
This would be useful. xxl

06/15/2017

02:27 PM Developer: RE: Tested PBI devices thread
foft wrote:
> External sio or the internal drives?
>
> I'm aware of some internal sio drive issues, seems to get ...
Stephen
07:51 AM Developer: RE: Tested PBI devices thread
External sio or the internal drives?
I'm aware of some internal sio drive issues, seems to get stuck in a bad state.
foft
07:47 AM Developer: RE: Demoing Eclaire
Yeah, exciting. I'd also like to see pictures. So far mine only made it as far as the local makers club. foft
06:18 AM Developer: RE: Demoing Eclaire
looking forward for the pictures :) ndary
04:42 AM Developer: Demoing Eclaire
I just wanted to post and let you guys know, that I will be taking my Eclaire to a computer show on June 24th. A gro... Stephen

06/14/2017

11:12 PM Developer: RE: SIO devices which use clockin/clock out?
I thought about that but these are pretty rare and somewhat valuable so I am reluctant to mod it. 917k
10:09 PM Developer: RE: SIO devices which use clockin/clock out?
sadosp wrote:
> 917k wrote:
> > Okay, so my Alien Group Voice Box is not going to work then, it is an earlier versi...
Stephen
09:25 PM Developer: RE: SIO devices which use clockin/clock out?
917k wrote:
> Okay, so my Alien Group Voice Box is not going to work then, it is an earlier version without the exte...
sadosp
07:27 AM Developer: RE: SIO devices which use clockin/clock out?
Okay, so my Alien Group Voice Box is not going to work then, it is an earlier version without the external power jack. 917k
07:03 AM Developer: RE: SIO devices which use clockin/clock out?
No, 12v is not connected. Didn't seem worth a regulator for that. foft
03:28 AM Developer: RE: SIO devices which use clockin/clock out?
So does pin 12 of the SIO jack carry +12v as it does on the 400/800? 917k
10:07 PM Developer: RE: Tested PBI devices thread
foft wrote:
> Thanks, very helpful. I'm pleased the MIO seems to be working too so far. Adjusting the PCB by a coupl...
Stephen
09:01 PM Developer: RE: Tested PBI devices thread
Thanks, very helpful. I'm pleased the MIO seems to be working too so far. Adjusting the PCB by a couple of mm seems o... foft
12:02 AM Developer: RE: Tested PBI devices thread
Confirmed. 4.75mm gap and the MIO plugs in fine. I do not have a drive to test it with, but hitting SELECT+RESET br... Stephen
09:25 PM Developer: RE: F10 and cartridge selected behavior
Actually I was hoping someone could pick up firmware development so I can work on the hardware... foft
09:21 PM Developer: RE: F10 and cartridge selected behavior
917k wrote:
> What do you think about having it automatically unload an existing cartridge if a new one is selected...
sadosp
08:58 AM Developer: RE: F10 and cartridge selected behavior
Thanks Panos, that works. What do you think about having it automatically unload an existing cartridge if a new one i... 917k
07:45 AM Developer: RE: V14 - Changes?
There is a file called 'changes' in the same folder.
I had the paddles wired up in the wrong order.
foft
03:15 AM Developer: RE: Custom keyboard designs for EclaireXL
Thank you. It is fun doing these, although they do take a while to put together. I'm going to have the 400 set made... 917k

06/13/2017

11:33 PM Developer: RE: Tested PBI devices thread
The connector looks like it requires 4.75mm, and the PCB has about 3.7. I will file this opening larger so that I ca... Stephen
11:01 PM Developer: RE: Tested PBI devices thread
I was attempting to test my MIO, but unfortunately, the PBI cable on the MIO will not fit the daughter board. I will... Stephen
10:04 PM Developer: Tested PBI devices thread
Please add tested devices here, along with their status
I'll start it off with the ones I have.
board,core,devi...
foft
10:51 PM Developer: V14 - Changes?
Is there a list of what changed between core 13, and 14? Stephen
10:47 PM Developer: RE: Custom keyboard designs for EclaireXL
Both designs are beautiful. I've been using a WASD Code keyboard (Cherry Green, white LED backlight) for a long time... Stephen

06/12/2017

10:29 PM Developer: RE: Custom keyboard designs for EclaireXL
917k wrote:
> Here is a mock-up of the custom keyboard I have designed for the EclaireXL based on the Atari 400...
...
sadosp
08:33 PM Developer: RE: Custom keyboard designs for EclaireXL
Not that I know of, although that thought did cross my mind as well. 917k
08:26 PM Developer: RE: Custom keyboard designs for EclaireXL
Can they make some kind of 'flat covers' for the ones we aren't using? foft
08:17 PM Developer: RE: Custom keyboard designs for EclaireXL
My plan is to have keycaps made at the WASD site. I verified that they can do full-color (like the 400 design) printi... 917k
08:14 PM Developer: RE: Custom keyboard designs for EclaireXL
Another mock-up, this time showing my XE styled keyboard design...
!http://i275.photobucket.com/albums/jj282/gulfr...
917k
08:11 PM Developer: RE: Custom keyboard designs for EclaireXL
Nice!
I'd be tempted to put freezer somewhere it won't be pressed by mistake. Do we need paddle mode?
So these ...
foft
07:30 AM Developer: Custom keyboard designs for EclaireXL
Here is a mock-up of the custom keyboard I have designed for the EclaireXL based on the Atari 400...
!http://i275....
917k
10:15 PM Developer: RE: SIO devices which use clockin/clock out?
foft wrote:
> I added support here in the latest core and this works for Nir. Could you check too please?
One of ...
sadosp
08:34 PM Developer: RE: SIO devices which use clockin/clock out?
I added support here in the latest core and this works for Nir. Could you check too please? foft
08:08 PM Developer: RE: Keyboard
Hi, I'm alive! Just sleeping then working.
Yeah we can do all of that. Steve, did you understand the replies I sen...
foft
04:07 PM Developer: RE: Keyboard
Mark!!!
Are you there to respond please?
sadosp

06/11/2017

09:30 PM Developer: RE: F10 and cartridge selected behavior
foft wrote:
> Yeah, Nir mentioned this one (http://www.64kib.com/redmine/issues/25).
>
No Mark. Nir have mentio...
sadosp
08:49 PM Developer: RE: F10 and cartridge selected behavior
Yeah, Nir mentioned this one (http://www.64kib.com/redmine/issues/25).
I will fix it...
I also notice that I g...
foft
07:58 PM Developer: F10 and cartridge selected behavior
I notice when I select a .CAR file from the system menu, it works the first time but it does not seem to survive a F1... 917k
09:00 PM Developer: Keyboard
Hello,
I am finalizing my first WASD keyboard design for ISO keyboard and I have a few ideas I'd like to run past ...
917k

06/07/2017

11:49 PM Developer: RE: Which case are you getting?
Very good. Not forget to kill the Chieftec logo in front. ;-)
I wait also to see the results from the try of Stephen.
sadosp
01:11 PM Developer: RE: Which case are you getting?
This was mine choice: https://www.amazon.co.uk/Chieftec-IX-01B-OP-Small-Factor-computer/dp/B00B5QY4SW
Professional q...
jozsef
02:49 AM Developer: RE: Which case are you getting?
I am considering this case:
https://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Fanless%20...
Stephen
11:42 PM Developer: RE: Anybody interested in some case badges?
I wait anxious Steve! :-) sadosp
09:50 PM Developer: RE: Anybody interested in some case badges?
Yes on both Panos, that is the company I am thinking about using to make the case badges. The first design I am worki... 917k
07:55 PM Developer: RE: Anybody interested in some case badges?
917k wrote:

> I only have 1" x 1" to work with so can't do anything too extravagant.
>
> Also, on a side note ...
sadosp
01:48 PM Developer: RE: Anybody interested in some case badges?
Or something in NEON style (sorry about the quality, I'm not a graphician, but you may get the idea): jozsef
01:25 PM Developer: RE: Anybody interested in some case badges?
Something like this, but with 'ÉCLAIRE' under the same colored ATARI logo:
http://3dconceptualdesigner.blogspot.hu/2...
jozsef
04:12 AM Developer: RE: Anybody interested in some case badges?
This is one concept I came up with for the EclaireXL case badge...
!http://i275.photobucket.com/albums/jj282/gul...
917k
05:37 PM Developer: RE: Any boards arrived?
I'm going to work on improving stability once I finish up the pbi support... foft
05:24 PM Developer: RE: Any boards arrived?
I just ordered USB-Blaster, have to wait until it arrives. xxl

06/06/2017

09:36 PM Developer: RE: Anybody interested in some case badges?
I'm interested probably, pending design:)
On a similar topic, these are essential for a good experience...
http:/...
foft
09:31 PM Developer: RE: Anybody interested in some case badges?
917k wrote:
> I am going to have some case badges for the EclaireXL made up. I am working on a couple of different d...
Stephen
08:20 PM Developer: RE: Anybody interested in some case badges?
@917k
You mean Atari or eclaireXL emblems? If yes I am in!
sadosp
06:43 PM Developer: RE: Anybody interested in some case badges?
what do you mean by case badges?
can you show an example?
Nir
ndary
04:54 PM Developer: Anybody interested in some case badges?
I am going to have some case badges for the EclaireXL made up. I am working on a couple of different designs, anybody... 917k
09:28 PM Developer: RE: Any boards arrived?
@xxl - no! Can you try v8? I hear v9 is iffy for some people... foft
12:17 PM Developer: RE: Any boards arrived?
Weird. Try a different psu and sd card.
I'll check your video after work.
foft
10:45 AM Developer: RE: Any boards arrived?
I do nothing. Eclair starts when I press the ResetSW button. xxl
10:30 AM Developer: RE: Any boards arrived?
How did you fix it? foft
10:29 AM Developer: RE: Any boards arrived?
it should work like this?
https://it.blachotrapez.eu/owncloud/public.php?service=files&t=16fdf49e35cc87296403392...
xxl
07:56 AM Developer: RE: Any boards arrived?
Works :-) after the reset on the motherboard. xxl
09:21 PM Developer: RE: v9 core available
I just mean I'd rather people develop software that works on the real thing. I'm happy to have turbo and additional m... foft
05:02 AM Developer: RE: v9 core available
... 917k

06/05/2017

08:09 PM Developer: RE: v9 core available
Well there is no existing software and I don't want to detract from the real Atari. I was thinking 80 col E: and a d... foft

06/04/2017

09:03 PM Developer: RE: v9 core available
How would these new modes be used? I read the message about the repurposed register $D400 to activate it, but I mean... Stephen
07:53 PM Developer: RE: v9 core available
2x and 4x antic colour clock mode.
So 320*200 in gtia modes or 1280*200 in gr 0.
foft
07:40 PM Developer: RE: v9 core available
... 917k
07:51 PM Developer: RE: Serial port functionality?
Not on the new board since it goes straight to a usb chip.
This would require additional hardware.
foft
07:44 PM Developer: Serial port functionality?
Foft, you mentioned the serial port was ready to connect to a PC... can the serial port also be used as an R: device ... 917k
01:09 PM Developer: RE: v8 Core - First NTSC Game Tests
Bomb jack works fine here. It flickers on NTSC - as it does on altirra too. Yes it takes a long time to load...
foft
09:39 AM Developer: RE: v8 Core - First NTSC Game Tests
It's the version on the SDCARD.zip file in the files section. 917k
09:14 AM Developer: RE: v8 Core - First NTSC Game Tests
Can you post the bombjack image? Mine turned out to be Gunpowder Charlie:)
Yeah I was starting to worry too! I won...
foft
09:06 AM Developer: RE: v8 Core - First NTSC Game Tests
I tried a different power supply and seem to be having better luck getting these to run, I have now been able to succ... 917k
08:28 AM Developer: RE: v8 Core - First NTSC Game Tests
I flashed using v8.jic, I am using a 5v 2A power supply ( https://smile.amazon.com/gp/product/B0125U4J1I/ref=oh_aui_d... 917k
07:29 AM Developer: RE: v8 Core - First NTSC Game Tests
For my own sanity I double checked these do run properly:) foft
07:22 AM Developer: RE: v8 Core - First NTSC Game Tests
That looks... errrr... pathetic, which it isn't!
I suspect the power supply.
Can you try xram21?
Although t...
foft
06:08 AM Developer: v8 Core - First NTSC Game Tests
Just got my unit up and running, flashed to v8 core...
CPU Turbo: 1x
Drive Turbo: Standard
Ram: 1MB
Rom: ATARIX...
917k
01:12 AM Developer: RE: XC12 power usage?
ndary wrote:
> tested the XC12 for an hour TR2 is not hot
>
> Nir
The transistor has been carefully selected a...
sadosp

06/03/2017

10:20 PM Developer: RE: v9 core available
Wow - that's absolutely perfect! I don't think I'd even request it in the HDMI/VGA resolutions. My real machines (I... Stephen
09:50 PM Developer: RE: v9 core available
In fact its exactly like the real machine - artifacting is just on composite mode and is due to combination of luma a... foft
09:46 PM Developer: RE: v9 core available
Thanks - the version I found worked perfectly the 1st time. I have upgraded to the v9 core. I can now switch into N... Stephen
09:33 PM Developer: RE: v9 core available
I could upload v17 if it helps... foft
09:27 PM Developer: RE: v9 core available
Wow - sorry, I'm new to this hardware stuff :) QuartusII download center is down this weekend for maintenance, but I... Stephen
09:15 PM Developer: RE: v9 core available
That version of Quartus is ancient and probably pre-dates the cyclone 5! I'm using v16.1 and just downloaded v17. foft
09:13 PM Developer: RE: v9 core available
Scratch that - I found the files I need. The version of the Quartus II software I am using is 11.1 sp1, Build 216. Stephen
09:11 PM Developer: RE: v9 core available
I am having several issues. First of all, I don't seem to be able to find the files for flashing. Second, when I tr... Stephen
08:45 PM Developer: RE: v9 core available
2nd bug in v9 - I broke the internal turbo freezer foft
02:05 PM Developer: RE: v9 core available
Arg, v9 breaks Numen!!
(I think it breaks at the same point I saw here, so I should review what that change was!:
...
foft
12:35 PM Developer: RE: v9 core available
Nir reported that v9 did not boot reliably for him. I guess timing is tight and this is a board-board timing differen... foft
07:09 AM Developer: RE: v9 core available
On the wiki (http://www.64kib.com/redmine/projects/eclairexl/wiki#Flashing) foft
12:29 AM Developer: RE: v9 core available
Is there directions somewhere on how to flash the board?
Thanks
917k
09:32 PM Developer: RE: Any boards arrived?
I think it was set up for 50Hz VGA by default. Some monitors and tvs will not support this directly. Did you check so... foft
09:26 PM Developer: RE: Any boards arrived?
Yes, I tested two different SD cards. Tomorrow will try another power supply. xxl
09:15 PM Developer: RE: Any boards arrived?
Did you do the SD card setup? The board currently uses that for the ROM. Panos posted an image, see the wiki for a link. foft
09:11 PM Developer: RE: Any boards arrived?
My board has arrived, but I have not been able to start it either on TV or on Monitor. Tomorrow I will try again. xxl
07:10 AM Developer: RE: SIO devices which use clockin/clock out?
Great:)
Don't connect it yet, I need to verify these lines on the logic analyzer furst.
foft
12:31 AM Developer: RE: SIO devices which use clockin/clock out?
I have an Alien Group speech synthesizer which I think uses the clock lines. I'll see if I can get things up and runn... 917k

06/02/2017

11:22 PM Developer: v9 core available
For prototype v1 and v2(aka v3!)
Decided to call the latest pbi protoype v9, since I consider it good enough to fl...
foft
08:56 PM Developer: SIO devices which use clockin/clock out?
Do any of you have any devices using these sio pins? They are not used by SIO2PC, SIO2SD, most disk drives and casset... foft
11:11 AM Developer: RE: XC12 power usage?
i will need to make a breakout cable, need to find a spare SIO cale
Nir
ndary
10:43 AM Developer: RE: XC12 power usage?
If you have an ammeter it would be very interesting to know the current on the 5V line and the motor control line. I ... foft
10:19 AM Developer: RE: XC12 power usage?
I mean with a smaller PSU foft
10:19 AM Developer: RE: XC12 power usage?
OK great. Thanks for testing it. Sounds like its spikes on connect/disconnect and button presses rather than continuo... foft
10:00 AM Developer: RE: XC12 power usage?

i have been testing the XC12 and managed to get it stable when using a 2A external PS (my mobile LG phone charger),...
ndary
07:15 AM Developer: RE: XC12 power usage?
Perhaps we need a big capacitor here Panos? Could try with a larger PSU. foft
07:13 AM Developer: RE: Which case are you getting?
We've set it up to reset the boards in general. Its a push to make switch I think rather than a toggle. So if you wan... foft
02:09 AM Developer: RE: Which case are you getting?
When this board is installed in a mini-itx case, is there a way that the front power switch on the case can toggle po... Stephen
02:14 AM Developer: Board safely arrived in the USA
I got to test a few things this evening. I was amazed at the clarity of the video signal via HDMI. I was also very ... Stephen

06/01/2017

10:48 PM Developer: RE: XC12 power usage?
but i do get strange phenomena..
occasionally the EclairXL does a soft reset when i press START or STOP.. it happe...
ndary
10:23 PM Developer: RE: XC12 power usage?
Woohoo:) foft
09:58 PM Developer: RE: XC12 power usage?
tested the XC12 for an hour TR2 is not hot
Nir
ndary
08:22 PM Developer: RE: XC12 power usage?
Its TR2 near interface 2 foft
08:17 PM Developer: RE: XC12 power usage?
yes i have one and can check how it load tapes
where are the transistors located?
Nir
ndary
10:29 AM Developer: XC12 power usage?
Does anyone have an XC12? I want to know if we give it enough power for the motor. Might be worth checking if the tra... foft
08:55 PM Developer: RE: How to center the image in PAL VGA mode?
yes!!!, will test it further later... now texting the XC12 Tape ndary
08:39 PM Developer: RE: How to center the image in PAL VGA mode?
Does NTSC mode work? foft
08:35 PM Developer: RE: How to center the image in PAL VGA mode?
ok, managed to get CORE8 flashed
Nir
ndary
08:20 PM Developer: RE: How to center the image in PAL VGA mode?
Yes if its there you can use it. There are instructions to make one on the wiki tag. foft
08:13 PM Developer: RE: How to center the image in PAL VGA mode?
how do i make a jic file?
there is a v8.jic on the folder as well.. can i use it?
Nir
ndary
07:53 PM Developer: RE: How to center the image in PAL VGA mode?
To make it last you need to make a .jic file. foft
07:53 PM Developer: RE: How to center the image in PAL VGA mode?
If you flashed a sof then it only lasts until you switch off! So when you say 'when I switch on' I guess you reset it... foft
06:16 PM Developer: RE: How to center the image in PAL VGA mode?
ok i just downloaded v8.sof, used the USB Blaster to program and its says 100% successful.
still when i switch on ...
ndary
08:24 PM Developer: RE: Which case are you getting?
Sorry forgot the link, here it is
http://www.ebay.com/itm/Lcdmod-Kit-Acrylic-Clear-Mini-ITX-Case-for-Intel-i3-5-7-...
ndary
08:21 PM Developer: RE: Which case are you getting?
Which one? foft
08:19 PM Developer: RE: Which case are you getting?
i am thinking of ordering this one
Nir
ndary
08:12 PM Developer: RE: Received board, first impressions....
The mapping from ps2 to atari key code is here:
http://www.64kib.com/atarixlfpga_svn/trunk/atari_800xl/common/a8core...
foft
06:23 PM Developer: RE: Received board, first impressions....
Back from holiday so I should have some more time to spend on the project. I ordered the switch Panos recommended so... 917k
02:12 PM Developer: RE: How does Random numbers are been generated in EclairXL?
Of course I mean lfsr! foft
10:25 AM Developer: RE: How does Random numbers are been generated in EclairXL?
Pokey has an lsfr foft
08:43 AM Developer: How does Random numbers are been generated in EclairXL?
Just a general question
does EclairXL board generate real random numbers or it 100% emulate the Atari?
Nir
ndary
 

Also available in: Atom