repo2/common/zpu/zpu_config_regs.vhdl @ 445
| 1 | markw | ---------------------------------------------------------------------------
|
|
-- (c) 2013 mark watson
|
|||
-- I am happy for anyone to use this for non-commercial use.
|
|||
-- If my vhdl files are used commercially or otherwise sold,
|
|||
-- please contact me for explicit permission at scrameta (gmail).
|
|||
-- This applies for source and binary form and derived works.
|
|||
---------------------------------------------------------------------------
|
|||
LIBRARY ieee;
|
|||
USE ieee.std_logic_1164.all;
|
|||
use ieee.numeric_std.all;
|
|||
ENTITY zpu_config_regs IS
|
|||
| 7 | markw | GENERIC
|
|
(
|
|||
| 57 | markw | platform : integer := 1; -- So ROM can detect which type of system...
|
|
| 277 | markw | spi_clock_div : integer := 4; -- Quite conservative by default - probably want to use 1 with 28MHz input clock, 2 for 57MHz input clock, 4 for 114MHz input clock etc
|
|
usb : integer :=0 -- USB host slave instances
|
|||
| 7 | markw | );
|
|
| 1 | markw | PORT
|
|
(
|
|||
CLK : IN STD_LOGIC;
|
|||
| 7 | markw | RESET_N : IN STD_LOGIC;
|
|
| 1 | markw | ||
| 7 | markw | POKEY_ENABLE : in std_logic;
|
|
| 1 | markw | ||
| 277 | markw | ADDR : IN STD_LOGIC_VECTOR(10 DOWNTO 0);
|
|
| 1 | markw | CPU_DATA_IN : IN STD_LOGIC_VECTOR(31 DOWNTO 0);
|
|
| 277 | markw | RD_EN : IN STD_LOGIC;
|
|
| 1 | markw | WR_EN : IN STD_LOGIC;
|
|
| 7 | markw | -- GENERIC INPUT REGS (need to synchronize upstream...)
|
|
IN1 : in std_logic_vector(31 downto 0);
|
|||
IN2 : in std_logic_vector(31 downto 0);
|
|||
IN3 : in std_logic_vector(31 downto 0);
|
|||
IN4 : in std_logic_vector(31 downto 0);
|
|||
| 1 | markw | ||
| 7 | markw | -- GENERIC OUTPUT REGS
|
|
OUT1 : out std_logic_vector(31 downto 0);
|
|||
OUT2 : out std_logic_vector(31 downto 0);
|
|||
OUT3 : out std_logic_vector(31 downto 0);
|
|||
OUT4 : out std_logic_vector(31 downto 0);
|
|||
| 277 | markw | OUT5 : out std_logic_vector(31 downto 0);
|
|
OUT6 : out std_logic_vector(31 downto 0);
|
|||
| 1 | markw | ||
-- SDCARD
|
|||
SDCARD_CLK : out std_logic;
|
|||
SDCARD_CMD : out std_logic;
|
|||
SDCARD_DAT : in std_logic;
|
|||
SDCARD_DAT3 : out std_logic;
|
|||
| 67 | markw | ||
-- SD DMA
|
|||
sd_addr : out std_logic_vector(15 downto 0);
|
|||
sd_data : out std_logic_vector(7 downto 0);
|
|||
sd_write : out std_logic;
|
|||
| 1 | markw | ||
-- ATARI interface (in future we can also turbo load by directly hitting memory...)
|
|||
SIO_DATA_IN : out std_logic;
|
|||
| 7 | markw | SIO_COMMAND : in std_logic;
|
|
| 1 | markw | SIO_DATA_OUT : in std_logic;
|
|
-- CPU interface
|
|||
DATA_OUT : OUT STD_LOGIC_VECTOR(31 DOWNTO 0);
|
|||
| 277 | markw | PAUSE_ZPU : out std_logic;
|
|
-- USB host
|
|||
CLK_USB : in std_logic;
|
|||
USBWireVPin :in std_logic_vector(usb-1 downto 0);
|
|||
USBWireVMin :in std_logic_vector(usb-1 downto 0);
|
|||
USBWireVPout :out std_logic_vector(usb-1 downto 0);
|
|||
USBWireVMout :out std_logic_vector(usb-1 downto 0);
|
|||
USBWireOE_n :out std_logic_vector(usb-1 downto 0)
|
|||
| 1 | markw | );
|
|
END zpu_config_regs;
|
|||
ARCHITECTURE vhdl OF zpu_config_regs IS
|
|||
| 277 | markw | ||
component usbHostCyc2Wrap_usb1t11
|
|||
port (
|
|||
clk_i :in std_logic;
|
|||
rst_i :in std_logic;
|
|||
address_i : in std_logic_vector(7 downto 0);
|
|||
data_i : in std_logic_vector(7 downto 0);
|
|||
data_o : out std_logic_vector(7 downto 0);
|
|||
we_i :in std_logic;
|
|||
strobe_i :in std_logic;
|
|||
ack_o :out std_logic;
|
|||
irq :out std_logic;
|
|||
usbClk :in std_logic;
|
|||
USBWireVPin :in std_logic;
|
|||
USBWireVMin :in std_logic;
|
|||
USBWireVPout :out std_logic;
|
|||
USBWireVMout :out std_logic;
|
|||
USBWireOE_n :out std_logic;
|
|||
USBFullSpeed :out std_logic
|
|||
);
|
|||
end component;
|
|||
| 1 | markw | function vectorize(s: std_logic) return std_logic_vector is
|
|
variable v: std_logic_vector(0 downto 0);
|
|||
begin
|
|||
v(0) := s;
|
|||
return v;
|
|||
end;
|
|||
| 277 | markw | signal device_decoded : std_logic_vector(7 downto 0);
|
|
signal device_wr_en : std_logic_vector(7 downto 0);
|
|||
signal device_rd_en : std_logic_vector(7 downto 0);
|
|||
| 1 | markw | signal addr_decoded : std_logic_vector(15 downto 0);
|
|
| 7 | markw | signal out1_next : std_logic_vector(31 downto 0);
|
|
signal out1_reg : std_logic_vector(31 downto 0);
|
|||
signal out2_next : std_logic_vector(31 downto 0);
|
|||
signal out2_reg : std_logic_vector(31 downto 0);
|
|||
signal out3_next : std_logic_vector(31 downto 0);
|
|||
signal out3_reg : std_logic_vector(31 downto 0);
|
|||
signal out4_next : std_logic_vector(31 downto 0);
|
|||
signal out4_reg : std_logic_vector(31 downto 0);
|
|||
| 277 | markw | signal out5_next : std_logic_vector(31 downto 0);
|
|
signal out5_reg : std_logic_vector(31 downto 0);
|
|||
signal out6_next : std_logic_vector(31 downto 0);
|
|||
signal out6_reg : std_logic_vector(31 downto 0);
|
|||
| 1 | markw | ||
signal spi_miso : std_logic;
|
|||
signal spi_mosi : std_logic;
|
|||
signal spi_busy : std_logic;
|
|||
signal spi_enable : std_logic;
|
|||
signal spi_chip_select : std_logic_vector(0 downto 0);
|
|||
signal spi_clk_out : std_logic;
|
|||
signal spi_tx_data : std_logic_vector(7 downto 0);
|
|||
signal spi_rx_data : std_logic_vector(7 downto 0);
|
|||
signal spi_addr_next : std_logic;
|
|||
signal spi_addr_reg : std_logic;
|
|||
| 7 | markw | signal spi_addr_reg_integer : integer;
|
|
| 1 | markw | signal spi_speed_next : std_logic_vector(7 downto 0);
|
|
signal spi_speed_reg : std_logic_vector(7 downto 0);
|
|||
| 7 | markw | signal spi_speed_reg_integer : integer;
|
|
| 1 | markw | ||
signal pokey_data_out : std_logic_vector(7 downto 0);
|
|||
| 7 | markw | signal pause_next : std_logic_vector(31 downto 0);
|
|
signal pause_reg : std_logic_vector(31 downto 0);
|
|||
signal paused_next : std_logic;
|
|||
signal paused_reg : std_logic;
|
|||
| 67 | markw | ||
| 277 | markw | signal subtimer_next : std_logic_vector(10 downto 0);
|
|
signal subtimer_reg : std_logic_vector(10 downto 0);
|
|||
signal timer_next : std_logic_vector(31 downto 0);
|
|||
signal timer_reg : std_logic_vector(31 downto 0);
|
|||
| 67 | markw | signal spi_dma_addr_next : std_logic_vector(15 downto 0);
|
|
signal spi_dma_addrend_next : std_logic_vector(15 downto 0);
|
|||
signal spi_dma_wr : std_logic;
|
|||
signal spi_dma_next : std_logic;
|
|||
signal spi_dma_addr_reg : std_logic_vector(15 downto 0);
|
|||
signal spi_dma_addrend_reg : std_logic_vector(15 downto 0);
|
|||
signal spi_dma_reg : std_logic;
|
|||
| 147 | markw | ||
signal spi_clk_div_integer : integer;
|
|||
signal spi_addr_integer : integer;
|
|||
| 277 | markw | ||
subtype usb_data_type is std_logic_vector(7 downto 0);
|
|||
type usb_data_array is array(0 to USB-1) of usb_data_type;
|
|||
signal usb_data : usb_data_array;
|
|||
signal data_out_regs : std_logic_vector(31 downto 0);
|
|||
signal data_out_mux : std_logic_vector(31 downto 0);
|
|||
| 1 | markw | begin
|
|
-- register
|
|||
| 7 | markw | process(clk,reset_n)
|
|
| 1 | markw | begin
|
|
| 7 | markw | if (reset_n='0') then
|
|
out1_reg <= (others=>'0');
|
|||
out2_reg <= (others=>'0');
|
|||
out3_reg <= (others=>'0');
|
|||
out4_reg <= (others=>'0');
|
|||
| 277 | markw | out5_reg <= (others=>'0');
|
|
out6_reg <= (others=>'0');
|
|||
| 7 | markw | ||
spi_addr_reg <= '1';
|
|||
spi_speed_reg <= X"80";
|
|||
pause_reg <= (others=>'0');
|
|||
paused_reg <= '0';
|
|||
| 67 | markw | ||
| 277 | markw | subtimer_reg <= (others=>'0');
|
|
timer_reg <= (others=>'0');
|
|||
| 67 | markw | spi_dma_addr_reg <= (others=>'0');
|
|
spi_dma_addrend_reg <= (others=>'0');
|
|||
spi_dma_reg <= '0';
|
|||
| 7 | markw | elsif (clk'event and clk='1') then
|
|
out1_reg <= out1_next;
|
|||
out2_reg <= out2_next;
|
|||
out3_reg <= out3_next;
|
|||
out4_reg <= out4_next;
|
|||
| 277 | markw | out5_reg <= out5_next;
|
|
out6_reg <= out6_next;
|
|||
| 7 | markw | ||
spi_addr_reg <= spi_addr_next;
|
|||
spi_speed_reg <= spi_speed_next;
|
|||
pause_reg <= pause_next;
|
|||
paused_reg <= paused_next;
|
|||
| 67 | markw | ||
| 277 | markw | subtimer_reg <= subtimer_next;
|
|
timer_reg <= timer_next;
|
|||
| 67 | markw | spi_dma_addr_reg <= spi_dma_addr_next;
|
|
spi_dma_addrend_reg <= spi_dma_addrend_next;
|
|||
spi_dma_reg <= spi_dma_next;
|
|||
| 1 | markw | end if;
|
|
end process;
|
|||
-- decode address
|
|||
| 277 | markw | decode_addr : entity work.complete_address_decoder
|
|
| 1 | markw | generic map(width=>4)
|
|
port map (addr_in=>addr(3 downto 0), addr_decoded=>addr_decoded);
|
|||
| 277 | markw | decode_device : entity work.complete_address_decoder
|
|
generic map(width=>3)
|
|||
port map (addr_in=>addr(10 downto 8), addr_decoded=>device_decoded);
|
|||
| 1 | markw | -- spi - for sd card access without bit banging...
|
|
-- 200KHz to start with - probably fine for 8-bit, can up it later after init
|
|||
| 147 | markw | spi_clk_div_integer <= to_integer(unsigned(spi_speed_reg));
|
|
spi_addr_integer <= to_integer(unsigned(vectorize(spi_addr_reg)));
|
|||
| 44 | markw | spi_master1 : entity work.spi_master
|
|
generic map(slaves=>1,d_width=>8)
|
|||
| 147 | markw | port map (clock=>clk,reset_n=>reset_n,enable=>spi_enable,cpol=>'0',cpha=>'0',cont=>'0',clk_div=>spi_clk_div_integer,addr=>spi_addr_integer,
|
|
| 44 | markw | tx_data=>spi_tx_data, miso=>spi_miso,sclk=>spi_clk_out,ss_n=>spi_chip_select,mosi=>spi_mosi,
|
|
rx_data=>spi_rx_data,busy=>spi_busy);
|
|||
| 1 | markw | ||
-- spi-programming model:
|
|||
-- reg for write/read
|
|||
-- data (send/receive)
|
|||
-- busy
|
|||
-- speed - 0=400KHz, 1=10MHz? Start with 400KHz then atari800core...
|
|||
-- chip select
|
|||
| 277 | markw | ||
-- device decode
|
|||
-- 0x000 - own regs (0)
|
|||
-- 0x100 - pokey (1)
|
|||
-- 0x200 - usb1 (2)
|
|||
-- 0x300 - usb2 (3)
|
|||
-- 0x400 - usb3 (4)
|
|||
-- 0x500 - usb4 (5)
|
|||
-- 0x600 - usb5 (6)
|
|||
-- 0x700 - usb6 (7)
|
|||
device_wr_en <= device_decoded and (wr_en&wr_en&wr_en&wr_en&wr_en&wr_en&wr_en&wr_en);
|
|||
device_rd_en <= device_decoded and (rd_en&rd_en&rd_en&rd_en&rd_en&rd_en&rd_en&rd_en);
|
|||
| 1 | markw | ||
-- uart - another Pokey! Running at atari frequency.
|
|||
| 283 | markw | -- with a state machine to capture command packets
|
|
-- can not easily poll frequently enough with zpu when also polling usb
|
|||
-- pokey1 : entity work.pokey
|
|||
-- port map (clk=>clk,ENABLE_179=>pokey_enable,addr=>addr(3 downto 0),data_in=>cpu_data_in(7 downto 0),wr_en=>device_wr_en(1),
|
|||
-- reset_n=>reset_n,keyboard_response=>"11",pot_in=>X"00",
|
|||
-- sio_in1=>sio_data_out,sio_in2=>'1',sio_in3=>'1', -- TODO, pokey dir...
|
|||
-- data_out=>pokey_data_out,
|
|||
-- sio_out1=>sio_data_in);
|
|||
| 1 | markw | ||
| 283 | markw | pokey1 : entity work.sio_device
|
|
PORT MAP
|
|||
(
|
|||
CLK => CLK,
|
|||
ADDR => addr(4 downto 0),
|
|||
CPU_DATA_IN => cpu_data_in(7 downto 0),
|
|||
EN => device_rd_en(1),
|
|||
WR_EN => device_wr_en(1),
|
|||
RESET_N => reset_n,
|
|||
POKEY_ENABLE => pokey_enable,
|
|||
SIO_DATA_IN => sio_data_in,
|
|||
SIO_COMMAND => sio_command,
|
|||
SIO_DATA_OUT => sio_data_out,
|
|||
-- CPU interface
|
|||
DATA_OUT => pokey_data_out
|
|||
);
|
|||
| 277 | markw | -- timer for approx ms
|
|
process(timer_reg,subtimer_reg, pokey_enable)
|
|||
begin
|
|||
timer_next <= timer_reg;
|
|||
subtimer_next <= subtimer_reg;
|
|||
if (pokey_enable = '1') then
|
|||
subtimer_next <= std_logic_vector(unsigned(subtimer_reg)-1);
|
|||
end if;
|
|||
if (subtimer_reg = "000"&x"00") then
|
|||
subtimer_next <= std_logic_vector(to_unsigned(11#1790#,11));
|
|||
timer_next <= std_logic_vector(unsigned(timer_reg)+1);
|
|||
end if;
|
|||
end process;
|
|||
-- USB host
|
|||
USBGEN:
|
|||
for I in 0 to USB-1 generate
|
|||
usbcon : usbHostCyc2Wrap_usb1t11
|
|||
port map
|
|||
(
|
|||
clk_i => clk,
|
|||
rst_i => not(reset_n),
|
|||
address_i => addr(7 downto 0),
|
|||
data_i => cpu_data_in(7 downto 0),
|
|||
data_o => usb_data(I), -- 2D array
|
|||
we_i => device_wr_en(I+2),
|
|||
strobe_i => device_wr_en(I+2) or device_rd_en(I+2),
|
|||
ack_o => open, -- always right away - checked in sim
|
|||
irq => open,
|
|||
usbClk => CLK_USB,
|
|||
USBWireVPin => USBWireVPin(I),
|
|||
USBWireVMin => USBWireVMin(I),
|
|||
USBWireVPout => USBWireVPout(I),
|
|||
USBWireVMout => USBWireVMout(I),
|
|||
USBWireOE_n => USBWireOE_n(I),
|
|||
USBFullSpeed => open
|
|||
);
|
|||
end generate USBGEN;
|
|||
process(device_decoded, data_out_regs, pokey_data_out, usb_data)
|
|||
begin
|
|||
data_out_mux <= (others=>'0');
|
|||
if (device_decoded(0) = '1') then
|
|||
data_out_mux <= data_out_regs;
|
|||
end if;
|
|||
if (device_decoded(1) = '1') then
|
|||
data_out_mux(7 downto 0) <= pokey_data_out;
|
|||
end if;
|
|||
for I in 0 to USB-1 loop
|
|||
if (device_decoded(I+2) = '1') then
|
|||
data_out_mux(7 downto 0) <= usb_data(I);
|
|||
end if;
|
|||
end loop;
|
|||
end process;
|
|||
| 1 | markw | -- hardware regs for ZPU
|
|
--
|
|||
| 7 | markw | -- 0-3: GENERIC INPUT (RO)
|
|
-- 4-7: GENERIC OUTPUT (R/W)
|
|||
| 277 | markw | -- 8: W:PAUSE, R:Timer (1ms)
|
|
| 7 | markw | -- 9: SPI_DATA
|
|
| 1 | markw | -- SPI_DATA (DONE)
|
|
-- W - write data (starts transmission)
|
|||
-- R - read data (wait for complete first)
|
|||
| 7 | markw | -- 10: SPI_STATE
|
|
| 1 | markw | -- SPI_STATE/SPI_CTRL (DONE)
|
|
-- R: 0=busy
|
|||
-- W: 0=select_n, speed
|
|||
| 7 | markw | -- 11: SIO
|
|
| 1 | markw | -- SIO
|
|
-- R: 0=CMD
|
|||
| 7 | markw | -- 12: TYPE
|
|
| 1 | markw | -- FPGA board (DONE)
|
|
-- R(32 bits) 0=DE1
|
|||
| 67 | markw | -- 13 : SPI_DMA
|
|
-- W(15 downto 0 = addr),(31 downto 16 = endAddr)
|
|||
| 277 | markw | -- 14-15 : GENERIC OUTPUT (R/W)
|
|
| 7 | markw | -- 16-31: POKEY! Low bytes only... i.e. pokey reg every 4 bytes...
|
|
| 1 | markw | ||
-- Writes to registers
|
|||
| 277 | markw | process(cpu_data_in,device_wr_en,addr,addr_decoded, spi_speed_reg, spi_addr_reg, out1_reg, out2_reg, out3_reg, out4_reg, out5_reg, out6_reg, pause_reg, pokey_enable, spi_dma_addr_reg, spi_dma_addrend_reg, spi_dma_reg, spi_busy, spi_dma_addr_next)
|
|
| 1 | markw | begin
|
|
spi_speed_next <= spi_speed_reg;
|
|||
spi_addr_next <= spi_addr_reg;
|
|||
spi_tx_data <= (others=>'0');
|
|||
spi_enable <= '0';
|
|||
| 44 | markw | ||
out1_next <= out1_reg;
|
|||
out2_next <= out2_reg;
|
|||
out3_next <= out3_reg;
|
|||
out4_next <= out4_reg;
|
|||
| 277 | markw | out5_next <= out5_reg;
|
|
out6_next <= out6_reg;
|
|||
| 67 | markw | ||
| 1 | markw | paused_next <= '0';
|
|
| 44 | markw | pause_next <= pause_reg;
|
|
if (not(pause_reg = X"00000000")) then
|
|||
if (POKEY_ENABLE='1') then
|
|||
pause_next <= std_LOGIC_VECTOR(unsigned(pause_reg)-to_unsigned(1,32));
|
|||
end if;
|
|||
| 1 | markw | paused_next <= '1';
|
|
end if;
|
|||
| 67 | markw | ||
spi_dma_addr_next <= spi_dma_addr_reg;
|
|||
spi_dma_addrend_next <= spi_dma_addrend_reg;
|
|||
spi_dma_wr <= '0';
|
|||
spi_dma_next <= spi_dma_reg;
|
|||
if (spi_dma_reg = '1') then
|
|||
paused_next <= '1';
|
|||
if (spi_busy = '0') then
|
|||
spi_dma_wr <= '1';
|
|||
| 147 | markw | spi_dma_addr_next <= std_logic_vector(unsigned(spi_dma_addr_reg)+to_unsigned(1,16));
|
|
| 67 | markw | spi_dma_next <= '0';
|
|
if (not(spi_dma_addr_next = spi_dma_addrend_reg)) then
|
|||
spi_tx_data <= X"ff";
|
|||
spi_enable <= '1';
|
|||
spi_dma_next <= '1';
|
|||
end if;
|
|||
end if;
|
|||
end if;
|
|||
| 1 | markw | ||
| 277 | markw | if (device_wr_en(0) = '1') then
|
|
| 1 | markw | if(addr_decoded(4) = '1') then
|
|
| 7 | markw | out1_next <= cpu_data_in;
|
|
| 1 | markw | end if;
|
|
if(addr_decoded(5) = '1') then
|
|||
| 7 | markw | out2_next <= cpu_data_in;
|
|
| 1 | markw | end if;
|
|
if(addr_decoded(6) = '1') then
|
|||
| 7 | markw | out3_next <= cpu_data_in;
|
|
end if;
|
|||
if(addr_decoded(7) = '1') then
|
|||
out4_next <= cpu_data_in;
|
|||
end if;
|
|||
| 277 | markw | if(addr_decoded(14) = '1') then
|
|
out5_next <= cpu_data_in;
|
|||
end if;
|
|||
if(addr_decoded(15) = '1') then
|
|||
out6_next <= cpu_data_in;
|
|||
end if;
|
|||
| 7 | markw | if(addr_decoded(8) = '1') then
|
|
pause_next <= cpu_data_in;
|
|||
paused_next <= '1';
|
|||
end if;
|
|||
if(addr_decoded(9) = '1') then
|
|||
| 1 | markw | -- TODO, check overrun?
|
|
spi_tx_data <= cpu_data_in(7 downto 0);
|
|||
spi_enable <= '1';
|
|||
end if;
|
|||
| 7 | markw | if(addr_decoded(10) = '1') then
|
|
| 1 | markw | spi_addr_next <= cpu_data_in(0);
|
|
if (cpu_data_in(1) = '1') then
|
|||
spi_speed_next <= X"80"; -- slow, for init
|
|||
else
|
|||
| 57 | markw | spi_speed_next <= std_logic_vector(to_unsigned(spi_clock_div,8)); -- turbo - up to 25MHz for SD, 20MHz for MMC I believe... If 1 then clock is half input, if 2 then clock is 1/4 input etc.
|
|
| 1 | markw | end if;
|
|
end if;
|
|||
| 67 | markw | ||
if(addr_decoded(13) = '1') then
|
|||
paused_next <= '1';
|
|||
spi_dma_addr_next <= cpu_data_in(15 downto 0);
|
|||
spi_dma_addrend_next <= cpu_data_in(31 downto 16);
|
|||
spi_dma_next <= '1';
|
|||
spi_tx_data <= X"ff";
|
|||
spi_enable <= '1';
|
|||
end if;
|
|||
| 1 | markw | ||
end if;
|
|||
end process;
|
|||
-- Read from registers
|
|||
| 277 | markw | process(addr,addr_decoded, in1, in2, in3, in4, out1_reg, out2_reg, out3_reg, out4_reg, out5_reg, out6_reg, SIO_COMMAND, spi_rx_data, spi_busy, timer_reg)
|
|
| 1 | markw | begin
|
|
| 277 | markw | data_out_regs <= (others=>'0');
|
|
| 1 | markw | ||
| 277 | markw | if (addr_decoded(0) = '1') then
|
|
data_out_regs <= in1;
|
|||
end if;
|
|||
if (addr_decoded(1) = '1') then
|
|||
data_out_regs <= in2;
|
|||
end if;
|
|||
if (addr_decoded(2) = '1') then
|
|||
data_out_regs <= in3;
|
|||
end if;
|
|||
if (addr_decoded(3) = '1') then
|
|||
data_out_regs <= in4;
|
|||
end if;
|
|||
| 7 | markw | ||
| 277 | markw | if (addr_decoded(4) = '1') then
|
|
data_out_regs <= out1_reg;
|
|||
end if;
|
|||
if (addr_decoded(5) = '1') then
|
|||
data_out_regs <= out2_reg;
|
|||
end if;
|
|||
if (addr_decoded(6) = '1') then
|
|||
data_out_regs <= out3_reg;
|
|||
end if;
|
|||
if (addr_decoded(7) = '1') then
|
|||
data_out_regs <= out4_reg;
|
|||
end if;
|
|||
| 1 | markw | ||
| 277 | markw | if (addr_decoded(14) = '1') then
|
|
data_out_regs <= out5_reg;
|
|||
end if;
|
|||
| 1 | markw | ||
| 277 | markw | if (addr_decoded(15) = '1') then
|
|
data_out_regs <= out6_reg;
|
|||
end if;
|
|||
| 1 | markw | ||
| 277 | markw | if (addr_decoded(8) = '1') then
|
|
data_out_regs <= timer_reg;
|
|||
| 1 | markw | end if;
|
|
| 277 | markw | ||
if (addr_decoded(9) = '1') then
|
|||
data_out_regs(7 downto 0) <= spi_rx_data;
|
|||
end if;
|
|||
if (addr_decoded(10) = '1') then
|
|||
data_out_regs(0) <= spi_busy;
|
|||
end if;
|
|||
if(addr_decoded(11) = '1') then
|
|||
data_out_regs(0) <= SIO_COMMAND;
|
|||
end if;
|
|||
if (addr_decoded(12) = '1') then
|
|||
data_out_regs <= std_logic_vector(to_unsigned(platform,32));
|
|||
end if;
|
|||
| 1 | markw | end process;
|
|
-- outputs
|
|||
PAUSE_ZPU <= paused_reg;
|
|||
| 7 | markw | ||
out1 <= out1_reg;
|
|||
out2 <= out2_reg;
|
|||
out3 <= out3_reg;
|
|||
out4 <= out4_reg;
|
|||
| 277 | markw | out5 <= out5_reg;
|
|
out6 <= out6_reg;
|
|||
| 1 | markw | ||
SDCARD_CLK <= spi_clk_out;
|
|||
SDCARD_CMD <= spi_mosi;
|
|||
spi_miso <= SDCARD_DAT; -- INPUT!! XXX
|
|||
SDCARD_DAT3 <= spi_chip_select(0);
|
|||
| 67 | markw | ||
| 277 | markw | data_out <= data_out_mux;
|
|
| 67 | markw | sd_addr <= spi_dma_addr_reg;
|
|
sd_data <= spi_rx_data;
|
|||
sd_write <= spi_dma_wr;
|
|||
| 1 | markw | end vhdl;
|
|