Project

General

Profile

Statistics
| Revision:

repo2 @ 327

Name Size Revision Age Author Comment
aeon_lite 325 over 10 years markw First cut of papilio duo support. NB: This does...
chameleon 325 over 10 years markw First cut of papilio duo support. NB: This does...
common 321 over 10 years markw Space reduction to fit onto a Spartan 6 LX9. Al...
de1 323 over 10 years markw EDBLL apparently works with lower drive strengt...
de1_5200 310 almost 11 years markw Fix for write with verify
firmware 325 over 10 years markw First cut of papilio duo support. NB: This does...
mcc216 325 over 10 years markw First cut of papilio duo support. NB: This does...
mcc216_5200 315 almost 11 years markw Accidentally broken...
mcctv 325 over 10 years markw First cut of papilio duo support. NB: This does...
mcctv_5200 310 almost 11 years markw Fix for write with verify
mist 325 over 10 years markw First cut of papilio duo support. NB: This does...
mist_5200 310 almost 11 years markw Fix for write with verify
papilioduo 327 over 10 years markw Fixed PLL to more appropriate for PAL/NTSC with...
replay 324 over 10 years markw Added inferred multiplier
sockit 317 almost 11 years markw Add shadow hardware regs hack as in zpu
unmerged 28 over 11 years markw Should never have been committed...
COPYRIGHT_NOTICE 3.62 KB 204 about 11 years markw Needs some updates, but made a start...
buildall.sh 725 Bytes 311 almost 11 years markw SOCkit first working version - with sound, driv...
chameleon_setup.txt 1.39 KB 150 over 11 years markw New link provided by Mark K
instructions.txt 4.91 KB 208 about 11 years markw Added mcctv notes
package.pl 3.17 KB 312 almost 11 years markw Added rbf

Latest revisions

# Date Author Comment
327 03/18/2015 09:40 PM markw

Fixed PLL to more appropriate for PAL/NTSC with he 32MHz input clock. Should work now, although no ZPU yet!
326 03/18/2015 09:18 PM markw

replacing with pal/ntsc plls of correct input frequency
325 03/17/2015 11:19 PM markw

First cut of papilio duo support. NB: This does not work yet, notably PLL needs changing. Then sram needs wiring up to allow zpu to run.
324 03/15/2015 04:08 PM markw

Added inferred multiplier
323 03/15/2015 04:08 PM markw

EDBLL apparently works with lower drive strength - there are some crosstalk issues I read. Added GPIO lower drive strength. Removed 25ohm resistors.
322 03/15/2015 04:03 PM markw

Now builds ok - disabled some features to fit in device. Also optimised pokey mixer.
321 03/15/2015 04:00 PM markw

Space reduction to fit onto a Spartan 6 LX9. Allow disabling stereo and covox. Also replace pokey non-linear table with a piecewise linear function rather than a LUT
320 02/27/2015 07:51 AM markw

New GPIO layout for PBI implementation
319 01/12/2015 10:50 PM markw

Fix write through problem
318 01/12/2015 10:18 PM markw

Fix some timing issues on faster CPUs - e.g. ARM on SOCKIT

View all revisions | View revisions

Also available in: Atom