repo2/papilioduo/sram.vhdl @ 326
| 325 | markw | ---------------------------------------------------------------------------
|
|
-- (c) 2013,2015 mark watson
|
|||
-- I am happy for anyone to use this for non-commercial use.
|
|||
-- If my vhdl files are used commercially or otherwise sold,
|
|||
-- please contact me for explicit permission at scrameta (gmail).
|
|||
-- This applies for source and binary form and derived works.
|
|||
---------------------------------------------------------------------------
|
|||
LIBRARY ieee;
|
|||
USE ieee.std_logic_1164.all;
|
|||
ENTITY sram IS
|
|||
PORT
|
|||
(
|
|||
ADDRESS : IN STD_LOGIC_VECTOR(18 DOWNTO 0);
|
|||
DIN : IN STD_LOGIC_vector(7 downto 0);
|
|||
WREN : IN STD_LOGIC;
|
|||
clk : in std_logic;
|
|||
reset_n : in std_logic;
|
|||
request : in std_logic;
|
|||
-- SRAM interface
|
|||
SRAM_ADDR: OUT STD_LOGIC_VECTOR(17 downto 0);
|
|||
SRAM_CE_N: OUT STD_LOGIC;
|
|||
SRAM_OE_N: OUT STD_LOGIC;
|
|||
SRAM_WE_N: OUT STD_LOGIC;
|
|||
SRAM_LB_N: OUT STD_LOGIC;
|
|||
SRAM_UB_N: OUT STD_LOGIC;
|
|||
SRAM_DQ: INOUT STD_LOGIC_VECTOR(7 downto 0);
|
|||
-- Provide data to system
|
|||
DOUT : OUT STD_LOGIC_VECTOR(15 downto 0);
|
|||
complete : out std_logic
|
|||
);
|
|||
END sram;
|
|||
-- TODO, implement 32-bit accesses in two cycles
|
|||
-- first cycle, capture inputs
|
|||
-- second cycle, sram access
|
|||
ARCHITECTURE slow OF sram IS
|
|||
signal oe_n_next : std_logic;
|
|||
signal oe_n_reg : std_logic;
|
|||
signal we_n_next : std_logic;
|
|||
signal we_n_reg : std_logic;
|
|||
signal data_next : std_logic_vector(7 downto 0);
|
|||
signal data_reg : std_logic_vector(7 downto 0);
|
|||
signal request_next : std_logic;
|
|||
signal request_reg : std_logic;
|
|||
BEGIN
|
|||
-- registers
|
|||
process(clk,reset_n)
|
|||
begin
|
|||
if (reset_n = '0') then
|
|||
oe_n_reg <= '1';
|
|||
we_n_reg <= '1';
|
|||
data_reg <= (others=>'0');
|
|||
request_reg <= '0';
|
|||
elsif (clk'event and clk='1') then
|
|||
oe_n_reg <= oe_n_next;
|
|||
we_n_reg <= we_n_next;
|
|||
data_reg <= data_next;
|
|||
request_reg <= request_next;
|
|||
end if;
|
|||
end process;
|
|||
-- next state
|
|||
process(din,wren,request,request_reg)
|
|||
begin
|
|||
data_next <= din;
|
|||
request_next <= '0';
|
|||
oe_n_next <= '0';
|
|||
we_n_next <= '1';
|
|||
if (request = '1') then
|
|||
-- on second cycle do write - address/data stable by now guaranteed (normal timequest...)
|
|||
oe_n_next <= wren;
|
|||
we_n_next <= not(wren);
|
|||
request_next <= '1';
|
|||
end if;
|
|||
end process;
|
|||
-- output
|
|||
SRAM_ADDR <= address;
|
|||
SRAM_CE_N <= '0';
|
|||
SRAM_OE_N <= oe_n_reg;
|
|||
SRAM_WE_N <= we_n_reg;
|
|||
SRAM_DQ <= data_reg when we_n_reg = '0' else (others=>'Z');
|
|||
DOUT <= SRAM_DQ;
|
|||
complete <= request_reg;
|
|||
--GPIO <= (others=>'0');
|
|||
END slow;
|