Project

General

Profile

Statistics
| Revision:

repo2/common/zpu @ 57

Name Size Revision Age Author Comment
  tb 7 over 11 years markw Cleaned up ZPU into slightly more generic form,...
simulate_zpu.sh 2.4 KB 8 over 11 years markw Renamed poly_* to pokey_poly_* since it is part...
zpu_config_regs.vhdl 8.67 KB 57 about 11 years markw Allow SPI clock speed to be set by generic. It ...
zpu_core.vhd 49.2 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
zpu_glue.vhdl 13.7 KB 7 over 11 years markw Cleaned up ZPU into slightly more generic form,...
zpucore.cmd 166 Bytes 7 over 11 years markw Cleaned up ZPU into slightly more generic form,...
zpucore.vhd 5.3 KB 57 about 11 years markw Allow SPI clock speed to be set by generic. It ...
zpucore.wcfg 3.75 KB 7 over 11 years markw Cleaned up ZPU into slightly more generic form,...
zpupkg.vhd 14.7 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...

Latest revisions

# Date Author Comment
57 05/17/2014 09:10 PM markw

Allow SPI clock speed to be set by generic. It was running at half speed for 28MHz platforms vs 58MHz platforms. Need to improve spi speed since byte wise writing is too slow loading roms - 8 seconds on startup!
44 05/07/2014 08:58 PM markw

Added missing spi component! Fix pokey instantiation. Fix pause.
9 04/13/2014 08:29 PM markw

Clock pause by pokey enable, so its a fixed speed even if system clock 28MHz,57MHz or otherwise
8 04/05/2014 10:01 PM markw

Renamed poly_* to pokey_poly_* since it is part of pokey
7 04/05/2014 09:54 PM markw

Cleaned up ZPU into slightly more generic form, though still clearly atari core targetted. Added inital tb, though needs rom to verify more. MIST sector side removed, but should be possible with external changes. Now ZPU instead has lots of GPIO.
1 03/23/2014 07:15 PM markw

Current unmerged vhdl for my Atari800 core and start at merging them into one tree with a common core

View revisions

Also available in: Atom