Project

General

Profile

Download (14.9 KB) Statistics
| Revision:

repo2/eclaireXL/gpiov2.vhd @ 474

---------------------------------------------------------------------------
-- (c) 2013 mark watson
-- I am happy for anyone to use this for non-commercial use.
-- If my vhdl files are used commercially or otherwise sold,
-- please contact me for explicit permission at scrameta (gmail).
-- This applies for source and binary form and derived works.
---------------------------------------------------------------------------
LIBRARY ieee;
USE ieee.std_logic_1164.all;
use ieee.numeric_std.all;

entity gpiov2 is
generic
(
cartridge_cycle_length : in integer := 32
);
port
(
clk : in std_logic;
reset_n : in std_logic;
gpio_enable : in std_logic;

-- pia
porta_in : out std_logic_vector(7 downto 0);
porta_out : in std_logic_vector(7 downto 0);
porta_output : in std_logic_vector(7 downto 0);
CA1_IN : OUT STD_LOGIC;
CA2_DIR_OUT : IN std_logic;
CA2_OUT : IN std_logic;
CA2_IN : OUT STD_LOGIC;
CB1_IN : OUT STD_LOGIC;
CB2_DIR_OUT : IN std_logic;
CB2_OUT : IN std_logic;
CB2_IN : OUT STD_LOGIC;
-- gtia
trig_in : out std_logic_vector(3 downto 0);
-- antic
lightpen : out std_logic;
-- pokey
pot_reset : in std_logic;
pot_in : out std_logic_vector(7 downto 0);
keyboard_scan : in std_logic_vector(5 downto 0);
keyboard_response : out std_logic_vector(1 downto 0);
SIO_IN : OUT STD_LOGIC;
SIO_OUT : IN STD_LOGIC;
SIO_CLOCKIN : OUT STD_LOGIC;
SIO_CLOCKOUT : IN STD_LOGIC;
-- cartridge
enable_179_early : in std_logic;
pbi_addr_out : in std_logic_vector(15 downto 0);
pbi_write_enable : in std_logic;
cart_data_read : out std_logic_vector(7 downto 0);
cart_request : in std_logic;
cart_complete : out std_logic;
cart_data_write : in std_logic_vector(7 downto 0);
rd4 : out std_logic;
rd5 : out std_logic;
s4_n : in std_logic;
s5_n : in std_logic;
cctl_n : in std_logic;
-- gpio connections
GPIO_0_IN : in std_logic_vector(35 downto 0);
GPIO_0_OUT : out std_logic_vector(35 downto 0);
GPIO_0_DIR_OUT : out std_logic_vector(35 downto 0);
GPIO_1_IN : in std_logic_vector(35 downto 0);
GPIO_1_OUT : out std_logic_vector(35 downto 0);
GPIO_1_DIR_OUT : out std_logic_vector(35 downto 0)
);
end gpiov2;

architecture vhdl of gpiov2 is
component synchronizer IS
PORT
(
CLK : IN STD_LOGIC;
RAW : IN STD_LOGIC;
SYNC : OUT STD_LOGIC
);
END component;
signal pot_in_async : std_logic_vector(7 downto 0);
signal porta_in_async : std_logic_vector(7 downto 0);
signal trig_in_async : std_logic_vector(3 downto 0);
signal trig_in_sync : std_logic_vector(3 downto 0);
signal bus_data_in : std_logic_vector(7 downto 0);
signal bus_data_out : std_logic_vector(7 downto 0);
signal bus_data_oe : std_logic;
signal bus_addr_out : std_logic_vector(15 downto 0);
signal bus_addr_oe : std_logic;
signal bus_write_n : std_logic;
signal bus_s4_n : std_logic;
signal bus_s5_n : std_logic;
signal bus_cctl_n : std_logic;
signal bus_control_oe : std_logic;
signal phi2 : std_logic;

signal rd4_async : std_logic;
signal rd5_async : std_logic;

signal keyboard_response_async : std_logic_vector(1 downto 0);
signal keyboard_response_gpio : std_logic_vector(1 downto 0);
signal porta_in_gpio : std_logic_vector(7 downto 0);
begin
-- OUTPUTS TO GPIO
-- unused
--GPIO_0_DIR_OUT(35 downto 4) <= (others=>'0');
GPIO_0_OUT(35 downto 2) <= (others=>'0');
GPIO_0_OUT(1) <= '0' when gpio_enable='1' else CB2_OUT;
GPIO_0_OUT(0) <= '0';

-- sio
--CB1=SIO_IRQ
--CB2=SIO_COMMAND
--CA1=SIO_PROCEED
--CA2=SIO_MOTOR_RAW

GPIO_0_DIR_OUT(0) <= '0';
GPIO_0_DIR_OUT(1) <= CB2_dir_out and not(CB2_OUT) when gpio_enable='1' else '1';
GPIO_0_DIR_OUT(2) <= '0';
GPIO_0_DIR_OUT(3) <= CA2_dir_out and not(CA2_OUT) and gpio_enable;
GPIO_0_DIR_OUT(4) <= not(SIO_OUT) and gpio_enable;
GPIO_0_DIR_OUT(5) <= '0';
GPIO_0_DIR_OUT(6) <= not(SIO_CLOCKOUT) and gpio_enable;
GPIO_0_DIR_OUT(7) <= '0';
CB1_in <= GPIO_0_IN(0) when gpio_enable='1' else '1';
CB2_in <= GPIO_0_IN(1) when gpio_enable='1' else '1';
CA1_in <= GPIO_0_IN(2) when gpio_enable='1' else '1';
CA2_in <= GPIO_0_IN(3) when gpio_enable='1' else '1';
SIO_IN <= GPIO_0_IN(5) when gpio_enable='1' else '1';
SIO_CLOCKIN <= GPIO_0_IN(7) when gpio_enable='1' else '1';
-- sticks
-- PORTA7,6,5,4,TRIG1,POT3,2,1,0,PORTA3,2,1,0,TRIG0
GPIO_0_DIR_OUT(8) <= gpio_enable and porta_output(7) and not(porta_out(7)); -- stick
GPIO_0_DIR_OUT(9) <= gpio_enable and porta_output(6) and not(porta_out(6)); -- stick
GPIO_0_DIR_OUT(10) <= gpio_enable and porta_output(5) and not(porta_out(5)); -- stick
GPIO_0_DIR_OUT(11) <= gpio_enable and porta_output(4) and not(porta_out(4)); -- stick
GPIO_0_DIR_OUT(17) <= gpio_enable and porta_output(3) and not(porta_out(3)); -- stick
GPIO_0_DIR_OUT(18) <= gpio_enable and porta_output(2) and not(porta_out(2)); -- stick
GPIO_0_DIR_OUT(19) <= gpio_enable and porta_output(1) and not(porta_out(1)); -- stick
GPIO_0_DIR_OUT(20) <= gpio_enable and porta_output(0) and not(porta_out(0)); -- stick

GPIO_0_DIR_OUT(12) <= '0'; -- trig
GPIO_0_DIR_OUT(21) <= '0'; -- trig

GPIO_0_DIR_OUT(13) <= gpio_enable and pot_reset;
GPIO_0_DIR_OUT(14) <= gpio_enable and pot_reset;
GPIO_0_DIR_OUT(15) <= gpio_enable and pot_reset;
GPIO_0_DIR_OUT(16) <= gpio_enable and pot_reset;

-- ext
GPIO_0_DIR_OUT(22) <= '0';
GPIO_0_DIR_OUT(23) <= '0';
GPIO_0_DIR_OUT(24) <= '0';
GPIO_0_DIR_OUT(25) <= '0';
GPIO_0_DIR_OUT(26) <= '0';
GPIO_0_DIR_OUT(27) <= '0';
-- keyboard
GPIO_0_DIR_OUT(28) <= gpio_enable and not(keyboard_scan(2)); -- keyboard scan 2
GPIO_0_DIR_OUT(29) <= gpio_enable and not(keyboard_scan(1)); -- keyboard scan 1
GPIO_0_DIR_OUT(30) <= gpio_enable and not(keyboard_scan(0)); -- keyboard scan 0
GPIO_0_DIR_OUT(31) <= '0'; -- keyboard response 1
GPIO_0_DIR_OUT(32) <= gpio_enable and not(keyboard_scan(5)); -- keyboard scan 5
GPIO_0_DIR_OUT(33) <= gpio_enable and not(keyboard_scan(4)); -- keyboard scan 4
GPIO_0_DIR_OUT(34) <= gpio_enable and not(keyboard_scan(3)); -- keyboard scan 3
GPIO_0_DIR_OUT(35) <= '0'; -- keyboard response 2
-- cart
GPIO_1_DIR_OUT(0) <= gpio_enable and bus_control_oe; -- cart control
GPIO_1_OUT(0) <= bus_cctl_n; -- cart control
GPIO_1_DIR_OUT(1) <= '1';
GPIO_1_OUT(1) <= phi2;
GPIO_1_DIR_OUT(2) <= '0'; -- RD5 rom present
GPIO_1_OUT(2) <= '0'; -- RD5 rom present
GPIO_1_DIR_OUT(3) <= gpio_enable;
GPIO_1_OUT(3) <= bus_write_n;
GPIO_1_DIR_OUT(4) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(4) <= bus_addr_out(10);
GPIO_1_DIR_OUT(5) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(5) <= bus_addr_out(11);
GPIO_1_DIR_OUT(6) <= gpio_enable and bus_control_oe;
GPIO_1_OUT(6) <= bus_s5_n;
GPIO_1_DIR_OUT(7) <= gpio_enable and bus_data_oe; -- d7
GPIO_1_OUT(7) <= bus_data_out(7); -- d7
GPIO_1_DIR_OUT(8) <= gpio_enable and bus_data_oe; -- d6
GPIO_1_OUT(8) <= bus_data_out(6); -- d6
GPIO_1_DIR_OUT(9) <= gpio_enable and bus_data_oe; -- d3
GPIO_1_OUT(9) <= bus_data_out(3); -- d3
GPIO_1_DIR_OUT(10) <= gpio_enable and bus_data_oe; -- d0
GPIO_1_OUT(10) <= bus_data_out(0); -- d0
GPIO_1_DIR_OUT(11) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(11) <= bus_addr_out(12);
GPIO_1_DIR_OUT(12) <= gpio_enable and bus_data_oe; -- d1
GPIO_1_OUT(12) <= bus_data_out(1); -- d1
GPIO_1_DIR_OUT(13) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(13) <= bus_addr_out(9);
GPIO_1_DIR_OUT(14) <= gpio_enable and bus_data_oe; -- d2
GPIO_1_OUT(14) <= bus_data_out(2); -- d2
GPIO_1_DIR_OUT(15) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(15) <= bus_addr_out(8);
GPIO_1_DIR_OUT(16) <= gpio_enable and bus_data_oe; -- d5
GPIO_1_OUT(16) <= bus_data_out(5); -- d5
GPIO_1_DIR_OUT(17) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(17) <= bus_addr_out(7);
GPIO_1_DIR_OUT(18) <= gpio_enable and bus_data_oe; -- d4
GPIO_1_OUT(18) <= bus_data_out(4); -- d4
GPIO_1_DIR_OUT(19) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(19) <= bus_addr_out(6);
GPIO_1_DIR_OUT(20) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(20) <= bus_addr_out(0);
GPIO_1_DIR_OUT(21) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(21) <= bus_addr_out(5);
GPIO_1_DIR_OUT(22) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(22) <= bus_addr_out(1);
GPIO_1_DIR_OUT(23) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(23) <= bus_addr_out(4);
GPIO_1_DIR_OUT(24) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(24) <= bus_addr_out(2);
GPIO_1_DIR_OUT(25) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(25) <= bus_addr_out(3);
GPIO_1_DIR_OUT(26) <= '0'; -- RD4 rom present
GPIO_1_OUT(26) <= '0'; -- RD4 rom present
GPIO_1_DIR_OUT(27) <= gpio_enable and bus_control_oe;
GPIO_1_OUT(27) <= bus_s4_n;

-- PBI: EXTSEL_N,A13-A15
GPIO_1_DIR_OUT(28) <= '0'; -- TODO, EXTSEL_N
GPIO_1_OUT(28) <= '0';
GPIO_1_DIR_OUT(29) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(29) <= bus_addr_out(13);
GPIO_1_DIR_OUT(30) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(30) <= bus_addr_out(14);
GPIO_1_DIR_OUT(31) <= gpio_enable and bus_addr_oe;
GPIO_1_OUT(31) <= bus_addr_out(15);
GPIO_1_DIR_OUT(32) <= '0'; -- TODO, MPD_N
GPIO_1_OUT(32) <= '0';
GPIO_1_DIR_OUT(33) <= '0'; -- TODO, REF_N
GPIO_1_OUT(33) <= '0';
GPIO_1_DIR_OUT(34) <= '0'; -- TODO, IRQ_N
GPIO_1_OUT(34) <= '0';
GPIO_1_DIR_OUT(35) <= '0'; -- TODO, RST_N
GPIO_1_OUT(35) <= '0';
-- INPUTS FROM GPIO
-- sticks
pot_in_async <=
gpio_enable&gpio_enable&gpio_enable&gpio_enable&gpio_enable&gpio_enable&gpio_enable&gpio_enable and
("0000"&
GPIO_0_IN(13)&GPIO_0_IN(14)&
GPIO_0_IN(15)&GPIO_0_IN(16));
pot_in0_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(0), sync=>pot_in(0));
pot_in1_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(1), sync=>pot_in(1));
pot_in2_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(2), sync=>pot_in(2));
pot_in3_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(3), sync=>pot_in(3));
pot_in4_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(4), sync=>pot_in(4));
pot_in5_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(5), sync=>pot_in(5));
pot_in6_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(6), sync=>pot_in(6));
pot_in7_synchronizer : synchronizer
port map (clk=>clk, raw=>pot_in_async(7), sync=>pot_in(7));
porta_in_async <=
GPIO_0_IN(8)&GPIO_0_IN(9)&GPIO_0_IN(10)&GPIO_0_IN(11)&
GPIO_0_IN(17)&GPIO_0_IN(18)&GPIO_0_IN(19)&GPIO_0_IN(20);
porta_in0_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(0), sync=>porta_in_gpio(0));
porta_in1_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(1), sync=>porta_in_gpio(1));
porta_in2_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(2), sync=>porta_in_gpio(2));
porta_in3_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(3), sync=>porta_in_gpio(3));
porta_in4_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(4), sync=>porta_in_gpio(4));
porta_in5_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(5), sync=>porta_in_gpio(5));
porta_in6_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(6), sync=>porta_in_gpio(6));
porta_in7_synchronizer : synchronizer
port map (clk=>clk, raw=>porta_in_async(7), sync=>porta_in_gpio(7));
porta_in(7 downto 0) <= porta_in_gpio(7 downto 0);
trig_in_async <= (not(gpio_enable&gpio_enable&"11") or (rd5_async&"1"&GPIO_0_IN(12)&GPIO_0_IN(21)));
trig_in0_synchronizer : synchronizer
port map (clk=>clk, raw=>trig_in_async(0), sync=>trig_in_sync(0));
trig_in1_synchronizer : synchronizer
port map (clk=>clk, raw=>trig_in_async(1), sync=>trig_in_sync(1));
trig_in2_synchronizer : synchronizer
port map (clk=>clk, raw=>trig_in_async(2), sync=>trig_in_sync(2));
trig_in3_synchronizer : synchronizer
port map (clk=>clk, raw=>trig_in_async(3), sync=>trig_in_sync(3));

trig_in <= trig_in_sync;
lightpen <= trig_in_sync(0) and trig_in_sync(1); -- either joystick button
-- keyboard
keyboard_response_async <= not(gpio_enable&gpio_enable) or (GPIO_0_IN(35)& GPIO_0_IN(31));
keyboard_response1_synchronizer : synchronizer
port map (clk=>clk, raw=>keyboard_response_async(0), sync=>keyboard_response_gpio(0));
keyboard_response2_synchronizer : synchronizer
port map (clk=>clk, raw=>keyboard_response_async(1), sync=>keyboard_response_gpio(1));
keyboard_response <= keyboard_response_gpio;
-- cartridge
-- 1(21). S4' Chip Select--$8000 to $9FFF A(22). RD4 ROM present--$8000 to $9FFF
-- 2(20). A3 CPU Address bus line B(GND). GND Ground
-- 3(19). A2 CPU Address bus line C(23). A4 CPU Address bus line
-- 4(18). A1 CPU Address bus line D(24). A5 CPU Address bus line
-- 5(17). A0 CPU Address bus line E(25). A6 CPU Address bus line
-- 6(16). D4 CPU Data bus line F(26). A7 CPU Address bus line
-- 7(15). D5 CPU Data bus line H(27). A8 CPU Address bus line
-- 8(14). D2 CPU Data bus line J(28). A9 CPU Address bus line
-- 9(13). D1 CPU Data bus line K(29). A12 CPU Address bus line
--10(12). D0 CPU Data bus line L(30). D3 CPU Data bus line
--11(11). D6 CPU Data bus line M(31). D7 CPU Data bus line
--12(10). S5' Chip Select--$A000 to $BFFF N(32). A11 CPU Address bus line
--13(5V). +5V P(33). A10 CPU Address bus line
--14(9). RD5 ROM present--$A000 to $BFFF R(34). R/W' CPU read/write
--15(8). CCTL' Cartridge control select S(35). B02,Phi2 CPU Phase 2 clock

-- S4'/S5' - chip select
-- CTTL' - control select
-- R/W'
-- clock (not needed for rom?)
-- RD5 ROM present (in)
-- RD4 ROM present (in)


bus_adaptor : ENTITY work.timing6502
GENERIC MAP
(
CYCLE_LENGTH => cartridge_cycle_length,
CONTROl_BITS => 3
)
PORT MAP
(
CLK => clk,
RESET_N => reset_n,

-- FPGA side
ENABLE_179_EARLY =>enable_179_early,

REQUEST => cart_request,
ADDR_IN => pbi_addr_out,
DATA_IN => cart_data_write,
WRITE_IN => pbi_write_enable,
CONTROL_N_IN => s4_n&s5_n&cctl_n,

DATA_OUT => cart_data_read,
COMPLETE => cart_complete,

-- 6502 side
BUS_DATA_IN => bus_data_in,
BUS_PHI1 => open,
BUS_PHI2 => phi2,
BUS_SUBCYCLE => open,
BUS_ADDR_OUT => bus_addr_out,
BUS_ADDR_OE => bus_addr_oe,
BUS_DATA_OUT => bus_data_out,
BUS_DATA_OE => bus_data_oe,
BUS_WRITE_N => bus_write_n,
BUS_CONTROL_N(2) => bus_s4_n,
BUS_CONTROL_N(1) => bus_s5_n,
BUS_CONTROL_N(0) => bus_cctl_n,
BUS_CONTROL_OE => bus_control_oe
);

rd4_async <= gpio_enable and GPIO_1_IN(26);
cart_rd4_synchronizer : synchronizer
port map (clk=>clk, raw=>rd4_async, sync=>rd4);
rd5_async <= gpio_enable and GPIO_1_IN(2);
cart_rd5_synchronizer : synchronizer
port map (clk=>clk, raw=>rd5_async, sync=>rd5);
bus_data_in <= GPIO_1_IN(7)&GPIO_1_IN(8)&GPIO_1_IN(16)&GPIO_1_IN(18)&GPIO_1_IN(9)&GPIO_1_IN(14)&GPIO_1_IN(12)&GPIO_1_IN(10);
--40 35
--39 34
--38 33
--37 32
--36 31
--35 30
--34 29
--33 28
--32 27
--31 26
--30 GND
--29 3.3V
--28 25
--27 24
--26 23
--25 22
--24 21
--23 20
--22 19
--21 18
--20 17
--19 16
--18 15
--17 14
--16 13
--15 12
--14 11
--13 10
--12 GND
--11 5V
--10 9
--9 8
--8 7
--7 6
--6 5
--5 4
--4 3
--3 2
--2 1
--1 0

end vhdl;


(19-19/41)