|
Here there are some quick instructions to setup the a8 core:
|
|
|
|
|
|
First as usual, turn off the Chameleon, remove the SD card and disconnect it from the docking station.
|
|
|
|
|
|
You need to flash with Chaco these files:
|
|
|
|
|
|
NTSC Core (output resolution of 640x480pixels, 59Hz):
|
|
|
|
http://www.scrameta.net/autobuild/YYYYMMDD/chameleon/build_NTSC_VGA/output_files/atari800core.rbf
|
|
|
|
|
|
PAL Core (output resolution of 720x576 pixels, 50Hz):
|
|
|
|
http://www.scrameta.net/autobuild/YYYYMMDD/chameleon/build_PAL_VGA/output_files/atari800core.rbf
|
|
|
|
|
|
I flashed the cores on Chaco's slots 14 and 15 (Chameleon’s 15 and 16).
|
|
|
|
|
|
Then you need to create these folders on the SD card:
|
|
|
|
(root)/atari800/rom/
|
|
|
|
(root)/atari800/user/
|
|
|
|
|
|
You have to download this file and unzip it:
|
|
|
|
http://atariarea.krap.pl/PLus/files/xf25.zip
|
|
|
|
|
|
And copy these files to the SD card:
|
|
|
|
|
|
System ROM:
|
|
|
|
(root)/atari800/rom/atarixl.rom
|
|
|
|
Basic:
|
|
|
|
(root)/atari800/rom/ataribas.rom
|
|
|
|
|
|
And finally you have to save your Atari games,etc. on the folder:
|
|
|
|
(root)/atari800/user/
|
|
|
|
|
|
Here you can see a list of games that have been tested on the a8 core:
|
|
|
|
|
|
http://goo.gl/MvUDfY
|
|
|
|
|
|
From the instructions:
|
|
|
|
|
|
“When running Atari software a lot of programs need to have basic disable. Hold Option when pressing reset (F8)” -> very important!
|
|
|
|
|
|
The core uses the joystick port 1 in the docking station.
|
|
|
|
|
|
Complete instructions are here:
|
|
|
|
|
|
http://www.scrameta.net/autobuild/YYYYMMDD/instructions.txt
|