Project

General

Profile

Statistics
| Revision:

repo2/mist @ 375

Name Size Revision Age Author Comment
  tb_data 70 about 11 years markw Added ZPU. Added read/write SD support. Fixed j...
atari800core.jdi 4.41 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
atari800core.qpf 1.23 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
atari800core.qsf 18 KB 215 over 10 years markw Changed mist to use simulated sd card, rather t...
atari800core.qws 2.99 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
atari800core.sdc 618 Bytes 23 about 11 years markw Adjusted this based on mist settings - in the h...
atari800core_mist.vhd 18.3 KB 346 about 10 years markw Split the concept of hsync, vsync and composite...
build.sh 2.24 KB 348 about 10 years markw Added Drive turbo selection. Fixed a few builds...
data_io.cmd 166 Bytes 70 about 11 years markw Added ZPU. Added read/write SD support. Fixed j...
data_io.wcfg 5.25 KB 70 about 11 years markw Added ZPU. Added read/write SD support. Fixed j...
makeqsf 735 Bytes 218 over 10 years markw Add a newline, in case there is not a newline a...
mist_sector_buffer.cmp 1.25 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
mist_sector_buffer.qip 302 Bytes 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
mist_sector_buffer.vhd 11.2 KB 1 over 11 years markw Current unmerged vhdl for my Atari800 core and ...
output_file.cof 522 Bytes 84 about 11 years markw Added scandoubler. Build some variants.
pll_ntsc.cmp 986 Bytes 165 almost 11 years markw Improved timings for PAL and NTSC
pll_ntsc.ppf 617 Bytes 165 almost 11 years markw Improved timings for PAL and NTSC
pll_ntsc.qip 359 Bytes 165 almost 11 years markw Improved timings for PAL and NTSC
pll_ntsc.vhd 19.1 KB 231 over 10 years markw Fixed pll - its important that the ps2 clock is...
pll_pal_post.cmp 1 KB 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_post.ppf 679 Bytes 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_post.qip 371 Bytes 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_post.vhd 19.4 KB 231 over 10 years markw Fixed pll - its important that the ps2 clock is...
pll_pal_pre.cmp 917 Bytes 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_pre.ppf 410 Bytes 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_pre.qip 368 Bytes 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
pll_pal_pre.vhd 14.8 KB 174 almost 11 years markw Split PAL pll into two - now much closer to rea...
sd_card.v 14.2 KB 240 over 10 years markw sd emulation fix - thanks Till
simulate_data_io.sh 1.98 KB 70 about 11 years markw Added ZPU. Added read/write SD support. Fixed j...
user_io.v 8.67 KB 216 over 10 years markw As discussed with Till - these were taken under...
zpu_rom.vhdl 52.7 KB 375 about 10 years markw Rebuild of ZPU firmware to pick up SIO patches ...

Latest revisions

# Date Author Comment
375 05/17/2015 02:48 PM markw

Rebuild of ZPU firmware to pick up SIO patches from Hias
351 04/08/2015 07:58 AM markw

Simple memory saving support - to help debugging
348 04/04/2015 11:50 PM markw

Added Drive turbo selection. Fixed a few builds. Added which target is building to output. Run up to 3 jobs at once during build.
346 04/04/2015 02:45 PM markw

Split the concept of hsync, vsync and composite sync. When composite sync used tie vsync high. The offset hsync pulse of pal/hsync is only present for 15khz composite sync. Remove rom selection since its unused.
341 03/27/2015 02:42 PM markw

Latest firmware and added papilio duo to build scripts
325 03/17/2015 11:19 PM markw

First cut of papilio duo support. NB: This does not work yet, notably PLL needs changing. Then sram needs wiring up to allow zpu to run.
310 01/10/2015 10:01 PM markw

Fix for write with verify
290 12/13/2014 01:53 PM markw

Add RGB builds without composite sync - for people with external sync combining hardware confused by composite sync
284 12/07/2014 11:28 PM markw

Missing entry in process sensitivity list
283 12/07/2014 11:27 PM markw

Capture SIO commands using a hardware state machine - too time critical to easily merge with USB polling otherwise (without much code refactoring...). Now drive emulation works on MCCTV with USB:)

View revisions

Also available in: Atom