repo2/mist @ 302
| Name | Size | Revision | Age | Author | Comment |
|---|---|---|---|---|---|
| tb_data | 70 | over 11 years | markw | Added ZPU. Added read/write SD support. Fixed j... | |
| atari800core.jdi | 4.41 KB | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| atari800core.qpf | 1.23 KB | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| atari800core.qsf | 18 KB | 215 | about 11 years | markw | Changed mist to use simulated sd card, rather t... |
| atari800core.qws | 2.99 KB | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| atari800core.sdc | 618 Bytes | 23 | over 11 years | markw | Adjusted this based on mist settings - in the h... |
| atari800core_mist.vhd | 18.3 KB | 284 | almost 11 years | markw | Missing entry in process sensitivity list |
| build.sh | 2.21 KB | 290 | almost 11 years | markw | Add RGB builds without composite sync - for peo... |
| data_io.cmd | 166 Bytes | 70 | over 11 years | markw | Added ZPU. Added read/write SD support. Fixed j... |
| data_io.wcfg | 5.25 KB | 70 | over 11 years | markw | Added ZPU. Added read/write SD support. Fixed j... |
| makeqsf | 735 Bytes | 218 | about 11 years | markw | Add a newline, in case there is not a newline a... |
| mist_sector_buffer.cmp | 1.25 KB | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| mist_sector_buffer.qip | 302 Bytes | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| mist_sector_buffer.vhd | 11.2 KB | 1 | over 11 years | markw | Current unmerged vhdl for my Atari800 core and ... |
| output_file.cof | 522 Bytes | 84 | over 11 years | markw | Added scandoubler. Build some variants. |
| pll_ntsc.cmp | 986 Bytes | 165 | about 11 years | markw | Improved timings for PAL and NTSC |
| pll_ntsc.ppf | 617 Bytes | 165 | about 11 years | markw | Improved timings for PAL and NTSC |
| pll_ntsc.qip | 359 Bytes | 165 | about 11 years | markw | Improved timings for PAL and NTSC |
| pll_ntsc.vhd | 19.1 KB | 231 | almost 11 years | markw | Fixed pll - its important that the ps2 clock is... |
| pll_pal_post.cmp | 1 KB | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_post.ppf | 679 Bytes | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_post.qip | 371 Bytes | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_post.vhd | 19.4 KB | 231 | almost 11 years | markw | Fixed pll - its important that the ps2 clock is... |
| pll_pal_pre.cmp | 917 Bytes | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_pre.ppf | 410 Bytes | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_pre.qip | 368 Bytes | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| pll_pal_pre.vhd | 14.8 KB | 174 | about 11 years | markw | Split PAL pll into two - now much closer to rea... |
| sd_card.v | 14.2 KB | 240 | almost 11 years | markw | sd emulation fix - thanks Till |
| simulate_data_io.sh | 1.98 KB | 70 | over 11 years | markw | Added ZPU. Added read/write SD support. Fixed j... |
| user_io.v | 8.67 KB | 216 | about 11 years | markw | As discussed with Till - these were taken under... |
| zpu_rom.vhdl | 52.7 KB | 283 | almost 11 years | markw | Capture SIO commands using a hardware state mac... |