|
-- -----------------------------------------------------------------------
|
|
--
|
|
-- Turbo Chameleon 64
|
|
--
|
|
-- Multi purpose FPGA expansion for the Commodore 64 computer
|
|
--
|
|
-- -----------------------------------------------------------------------
|
|
-- Copyright 2005-2018 by Peter Wendrich (pwsoft@syntiac.com)
|
|
-- http://www.syntiac.com
|
|
--
|
|
-- This source file is free software: you can redistribute it and/or modify
|
|
-- it under the terms of the GNU Lesser General Public License as published
|
|
-- by the Free Software Foundation, either version 3 of the License, or
|
|
-- (at your option) any later version.
|
|
--
|
|
-- This source file is distributed in the hope that it will be useful,
|
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
-- GNU General Public License for more details.
|
|
--
|
|
-- You should have received a copy of the GNU General Public License
|
|
-- along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
--
|
|
-- -----------------------------------------------------------------------
|
|
-- I/O controller entity for the shiftregister controlling PS/2,
|
|
-- LEDs and reset signals on Turbo Chameleon 64 second edition.
|
|
--
|
|
-- -----------------------------------------------------------------------
|
|
-- clk - System clock
|
|
--
|
|
-- ser_out_clk - Serial clock, connect on toplevel to port with same name
|
|
-- ser_out_dat - Serial data, connect on toplevel to port with same name
|
|
-- ser_out_rclk - Serial strobe, connect on toplevel to port with same name
|
|
--
|
|
-- reset_c64 - Active high, pulls reset on the cartridge port
|
|
-- reset_iec - Active high, pulls reset on teh IEC connector
|
|
-- ps2_mouse_clk - Open drain output for PS/2 mouse clock (active low)
|
|
-- ps2_mouse_dat - Open drain output for PS/2 mouse data (active low)
|
|
-- ps2_keybard_clk - Open drain output for PS/2 keyboard clock (active low)
|
|
-- ps2_keybard_dat - Open drain output for PS/2 keyboard data (active low)
|
|
-- led_green - Active high, enable the green LED
|
|
-- led_red - Active high, enable the red LED
|
|
-- -----------------------------------------------------------------------
|
|
|
|
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
|
|
entity chameleon2_io_shiftreg is
|
|
port (
|
|
clk : in std_logic;
|
|
|
|
ser_out_clk : out std_logic;
|
|
ser_out_dat : out std_logic;
|
|
ser_out_rclk : out std_logic;
|
|
|
|
reset_c64 : in std_logic;
|
|
reset_iec : in std_logic;
|
|
ps2_mouse_clk : in std_logic;
|
|
ps2_mouse_dat : in std_logic;
|
|
ps2_keyboard_clk : in std_logic;
|
|
ps2_keyboard_dat : in std_logic;
|
|
led_green : in std_logic;
|
|
led_red : in std_logic
|
|
);
|
|
end entity;
|
|
|
|
architecture rtl of chameleon2_io_shiftreg is
|
|
signal state_reg : unsigned(6 downto 0) := (others => '0');
|
|
signal clk_reg : std_logic := '0';
|
|
signal dat_reg : std_logic := '0';
|
|
signal rclk_reg : std_logic := '1';
|
|
begin
|
|
ser_out_clk <= clk_reg;
|
|
ser_out_dat <= dat_reg;
|
|
ser_out_rclk <= rclk_reg;
|
|
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
state_reg <= state_reg + 1;
|
|
clk_reg <= state_reg(2) and (not state_reg(6));
|
|
rclk_reg <= state_reg(2) and state_reg(6);
|
|
case state_reg(6 downto 3) is
|
|
when "0000" => dat_reg <= reset_c64;
|
|
when "0001" => dat_reg <= reset_iec;
|
|
when "0010" => dat_reg <= not ps2_mouse_clk;
|
|
when "0011" => dat_reg <= not ps2_mouse_dat;
|
|
when "0100" => dat_reg <= not ps2_keyboard_clk;
|
|
when "0101" => dat_reg <= not ps2_keyboard_dat;
|
|
when "0110" => dat_reg <= not led_green;
|
|
when "0111" => dat_reg <= not led_red;
|
|
when "1000" => null;
|
|
when others => state_reg <= (others => '0');
|
|
end case;
|
|
end if;
|
|
end process;
|
|
end architecture;
|