repo2/chameleon2/pll_ntsc.vhd
| 872 | markw | -- megafunction wizard: %ALTPLL%
|
|
-- GENERATION: STANDARD
|
|||
-- VERSION: WM1.0
|
|||
-- MODULE: altpll
|
|||
-- ============================================================
|
|||
-- File Name: pll_ntsc.vhd
|
|||
-- Megafunction Name(s):
|
|||
-- altpll
|
|||
--
|
|||
-- Simulation Library Files(s):
|
|||
-- altera_mf
|
|||
-- ============================================================
|
|||
-- ************************************************************
|
|||
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
|
|||
--
|
|||
-- 18.0.0 Build 614 04/24/2018 SJ Lite Edition
|
|||
-- ************************************************************
|
|||
--Copyright (C) 2018 Intel Corporation. All rights reserved.
|
|||
--Your use of Intel Corporation's design tools, logic functions
|
|||
--and other software and tools, and its AMPP partner logic
|
|||
--functions, and any output files from any of the foregoing
|
|||
--(including device programming or simulation files), and any
|
|||
--associated documentation or information are expressly subject
|
|||
--to the terms and conditions of the Intel Program License
|
|||
--Subscription Agreement, the Intel Quartus Prime License Agreement,
|
|||
--the Intel FPGA IP License Agreement, or other applicable license
|
|||
--agreement, including, without limitation, that your use is for
|
|||
--the sole purpose of programming logic devices manufactured by
|
|||
--Intel and sold by Intel or its authorized distributors. Please
|
|||
--refer to the applicable agreement for further details.
|
|||
LIBRARY ieee;
|
|||
USE ieee.std_logic_1164.all;
|
|||
LIBRARY altera_mf;
|
|||
USE altera_mf.all;
|
|||
ENTITY pll_ntsc IS
|
|||
PORT
|
|||
(
|
|||
areset : IN STD_LOGIC := '0';
|
|||
inclk0 : IN STD_LOGIC := '0';
|
|||
c0 : OUT STD_LOGIC ;
|
|||
c1 : OUT STD_LOGIC ;
|
|||
c2 : OUT STD_LOGIC ;
|
|||
locked : OUT STD_LOGIC
|
|||
);
|
|||
END pll_ntsc;
|
|||
ARCHITECTURE SYN OF pll_ntsc IS
|
|||
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (4 DOWNTO 0);
|
|||
SIGNAL sub_wire1 : STD_LOGIC ;
|
|||
SIGNAL sub_wire2 : STD_LOGIC ;
|
|||
SIGNAL sub_wire3 : STD_LOGIC ;
|
|||
SIGNAL sub_wire4 : STD_LOGIC ;
|
|||
SIGNAL sub_wire5 : STD_LOGIC ;
|
|||
SIGNAL sub_wire6 : STD_LOGIC_VECTOR (1 DOWNTO 0);
|
|||
SIGNAL sub_wire7_bv : BIT_VECTOR (0 DOWNTO 0);
|
|||
SIGNAL sub_wire7 : STD_LOGIC_VECTOR (0 DOWNTO 0);
|
|||
COMPONENT altpll
|
|||
GENERIC (
|
|||
bandwidth_type : STRING;
|
|||
clk0_divide_by : NATURAL;
|
|||
clk0_duty_cycle : NATURAL;
|
|||
clk0_multiply_by : NATURAL;
|
|||
clk0_phase_shift : STRING;
|
|||
clk1_divide_by : NATURAL;
|
|||
clk1_duty_cycle : NATURAL;
|
|||
clk1_multiply_by : NATURAL;
|
|||
clk1_phase_shift : STRING;
|
|||
clk2_divide_by : NATURAL;
|
|||
clk2_duty_cycle : NATURAL;
|
|||
clk2_multiply_by : NATURAL;
|
|||
clk2_phase_shift : STRING;
|
|||
compensate_clock : STRING;
|
|||
inclk0_input_frequency : NATURAL;
|
|||
intended_device_family : STRING;
|
|||
lpm_hint : STRING;
|
|||
lpm_type : STRING;
|
|||
operation_mode : STRING;
|
|||
pll_type : STRING;
|
|||
port_activeclock : STRING;
|
|||
port_areset : STRING;
|
|||
port_clkbad0 : STRING;
|
|||
port_clkbad1 : STRING;
|
|||
port_clkloss : STRING;
|
|||
port_clkswitch : STRING;
|
|||
port_configupdate : STRING;
|
|||
port_fbin : STRING;
|
|||
port_inclk0 : STRING;
|
|||
port_inclk1 : STRING;
|
|||
port_locked : STRING;
|
|||
port_pfdena : STRING;
|
|||
port_phasecounterselect : STRING;
|
|||
port_phasedone : STRING;
|
|||
port_phasestep : STRING;
|
|||
port_phaseupdown : STRING;
|
|||
port_pllena : STRING;
|
|||
port_scanaclr : STRING;
|
|||
port_scanclk : STRING;
|
|||
port_scanclkena : STRING;
|
|||
port_scandata : STRING;
|
|||
port_scandataout : STRING;
|
|||
port_scandone : STRING;
|
|||
port_scanread : STRING;
|
|||
port_scanwrite : STRING;
|
|||
port_clk0 : STRING;
|
|||
port_clk1 : STRING;
|
|||
port_clk2 : STRING;
|
|||
port_clk3 : STRING;
|
|||
port_clk4 : STRING;
|
|||
port_clk5 : STRING;
|
|||
port_clkena0 : STRING;
|
|||
port_clkena1 : STRING;
|
|||
port_clkena2 : STRING;
|
|||
port_clkena3 : STRING;
|
|||
port_clkena4 : STRING;
|
|||
port_clkena5 : STRING;
|
|||
port_extclk0 : STRING;
|
|||
port_extclk1 : STRING;
|
|||
port_extclk2 : STRING;
|
|||
port_extclk3 : STRING;
|
|||
self_reset_on_loss_lock : STRING;
|
|||
width_clock : NATURAL
|
|||
);
|
|||
PORT (
|
|||
areset : IN STD_LOGIC ;
|
|||
inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
|
|||
clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0);
|
|||
locked : OUT STD_LOGIC
|
|||
);
|
|||
END COMPONENT;
|
|||
BEGIN
|
|||
sub_wire7_bv(0 DOWNTO 0) <= "0";
|
|||
sub_wire7 <= To_stdlogicvector(sub_wire7_bv);
|
|||
sub_wire3 <= sub_wire0(2);
|
|||
sub_wire2 <= sub_wire0(1);
|
|||
sub_wire1 <= sub_wire0(0);
|
|||
c0 <= sub_wire1;
|
|||
c1 <= sub_wire2;
|
|||
c2 <= sub_wire3;
|
|||
locked <= sub_wire4;
|
|||
sub_wire5 <= inclk0;
|
|||
sub_wire6 <= sub_wire7(0 DOWNTO 0) & sub_wire5;
|
|||
altpll_component : altpll
|
|||
GENERIC MAP (
|
|||
bandwidth_type => "AUTO",
|
|||
clk0_divide_by => 48,
|
|||
clk0_duty_cycle => 50,
|
|||
clk0_multiply_by => 109,
|
|||
clk0_phase_shift => "0",
|
|||
clk1_divide_by => 96,
|
|||
clk1_duty_cycle => 50,
|
|||
clk1_multiply_by => 109,
|
|||
clk1_phase_shift => "0",
|
|||
clk2_divide_by => 48,
|
|||
clk2_duty_cycle => 50,
|
|||
clk2_multiply_by => 109,
|
|||
clk2_phase_shift => "0",
|
|||
compensate_clock => "CLK0",
|
|||
inclk0_input_frequency => 20000,
|
|||
intended_device_family => "Cyclone 10 LP",
|
|||
lpm_hint => "CBX_MODULE_PREFIX=pll_ntsc",
|
|||
lpm_type => "altpll",
|
|||
operation_mode => "NORMAL",
|
|||
pll_type => "AUTO",
|
|||
port_activeclock => "PORT_UNUSED",
|
|||
port_areset => "PORT_USED",
|
|||
port_clkbad0 => "PORT_UNUSED",
|
|||
port_clkbad1 => "PORT_UNUSED",
|
|||
port_clkloss => "PORT_UNUSED",
|
|||
port_clkswitch => "PORT_UNUSED",
|
|||
port_configupdate => "PORT_UNUSED",
|
|||
port_fbin => "PORT_UNUSED",
|
|||
port_inclk0 => "PORT_USED",
|
|||
port_inclk1 => "PORT_UNUSED",
|
|||
port_locked => "PORT_USED",
|
|||
port_pfdena => "PORT_UNUSED",
|
|||
port_phasecounterselect => "PORT_UNUSED",
|
|||
port_phasedone => "PORT_UNUSED",
|
|||
port_phasestep => "PORT_UNUSED",
|
|||
port_phaseupdown => "PORT_UNUSED",
|
|||
port_pllena => "PORT_UNUSED",
|
|||
port_scanaclr => "PORT_UNUSED",
|
|||
port_scanclk => "PORT_UNUSED",
|
|||
port_scanclkena => "PORT_UNUSED",
|
|||
port_scandata => "PORT_UNUSED",
|
|||
port_scandataout => "PORT_UNUSED",
|
|||
port_scandone => "PORT_UNUSED",
|
|||
port_scanread => "PORT_UNUSED",
|
|||
port_scanwrite => "PORT_UNUSED",
|
|||
port_clk0 => "PORT_USED",
|
|||
port_clk1 => "PORT_USED",
|
|||
port_clk2 => "PORT_USED",
|
|||
port_clk3 => "PORT_UNUSED",
|
|||
port_clk4 => "PORT_UNUSED",
|
|||
port_clk5 => "PORT_UNUSED",
|
|||
port_clkena0 => "PORT_UNUSED",
|
|||
port_clkena1 => "PORT_UNUSED",
|
|||
port_clkena2 => "PORT_UNUSED",
|
|||
port_clkena3 => "PORT_UNUSED",
|
|||
port_clkena4 => "PORT_UNUSED",
|
|||
port_clkena5 => "PORT_UNUSED",
|
|||
port_extclk0 => "PORT_UNUSED",
|
|||
port_extclk1 => "PORT_UNUSED",
|
|||
port_extclk2 => "PORT_UNUSED",
|
|||
port_extclk3 => "PORT_UNUSED",
|
|||
self_reset_on_loss_lock => "ON",
|
|||
width_clock => 5
|
|||
)
|
|||
PORT MAP (
|
|||
areset => areset,
|
|||
inclk => sub_wire6,
|
|||
clk => sub_wire0,
|
|||
locked => sub_wire4
|
|||
);
|
|||
END SYN;
|
|||
-- ============================================================
|
|||
-- CNX file retrieval info
|
|||
-- ============================================================
|
|||
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
|
|||
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
|
|||
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
|
|||
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
|
|||
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
|
|||
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"
|
|||
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "48"
|
|||
-- Retrieval info: PRIVATE: DIV_FACTOR1 NUMERIC "96"
|
|||
-- Retrieval info: PRIVATE: DIV_FACTOR2 NUMERIC "48"
|
|||
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
|
|||
-- Retrieval info: PRIVATE: DUTY_CYCLE1 STRING "50.00000000"
|
|||
-- Retrieval info: PRIVATE: DUTY_CYCLE2 STRING "50.00000000"
|
|||
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "113.541664"
|
|||
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "56.770832"
|
|||
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE2 STRING "113.541664"
|
|||
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
|
|||
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
|
|||
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
|
|||
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
|
|||
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
|
|||
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
|
|||
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000"
|
|||
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
|
|||
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
|
|||
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
|
|||
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
|
|||
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
|
|||
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
|
|||
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
|
|||
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
|
|||
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT1 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT2 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
|
|||
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
|
|||
-- Retrieval info: PRIVATE: MIRROR_CLK1 STRING "0"
|
|||
-- Retrieval info: PRIVATE: MIRROR_CLK2 STRING "0"
|
|||
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "109"
|
|||
-- Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "109"
|
|||
-- Retrieval info: PRIVATE: MULT_FACTOR2 NUMERIC "109"
|
|||
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "113.54545400"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ1 STRING "113.54545400"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ2 STRING "113.54545400"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE1 STRING "0"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE2 STRING "0"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT1 STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT2 STRING "MHz"
|
|||
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
|
|||
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT1 STRING "0.00000000"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT2 STRING "0.00000000"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT1 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT2 STRING "deg"
|
|||
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
|
|||
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
|
|||
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
|
|||
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_ntsc.mif"
|
|||
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
|
|||
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
|
|||
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "1"
|
|||
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
|
|||
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
|
|||
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
|
|||
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
|
|||
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
|
|||
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
|
|||
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
|
|||
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
|
|||
-- Retrieval info: PRIVATE: STICKY_CLK1 STRING "1"
|
|||
-- Retrieval info: PRIVATE: STICKY_CLK2 STRING "1"
|
|||
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
|
|||
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
|
|||
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
|
|||
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
|
|||
-- Retrieval info: PRIVATE: USE_CLK1 STRING "1"
|
|||
-- Retrieval info: PRIVATE: USE_CLK2 STRING "1"
|
|||
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
|
|||
-- Retrieval info: PRIVATE: USE_CLKENA1 STRING "0"
|
|||
-- Retrieval info: PRIVATE: USE_CLKENA2 STRING "0"
|
|||
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
|
|||
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
|
|||
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
|
|||
-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"
|
|||
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "48"
|
|||
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
|
|||
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "109"
|
|||
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
|
|||
-- Retrieval info: CONSTANT: CLK1_DIVIDE_BY NUMERIC "96"
|
|||
-- Retrieval info: CONSTANT: CLK1_DUTY_CYCLE NUMERIC "50"
|
|||
-- Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "109"
|
|||
-- Retrieval info: CONSTANT: CLK1_PHASE_SHIFT STRING "0"
|
|||
-- Retrieval info: CONSTANT: CLK2_DIVIDE_BY NUMERIC "48"
|
|||
-- Retrieval info: CONSTANT: CLK2_DUTY_CYCLE NUMERIC "50"
|
|||
-- Retrieval info: CONSTANT: CLK2_MULTIPLY_BY NUMERIC "109"
|
|||
-- Retrieval info: CONSTANT: CLK2_PHASE_SHIFT STRING "0"
|
|||
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
|
|||
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000"
|
|||
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
|
|||
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
|
|||
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
|
|||
-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
|
|||
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_USED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
|
|||
-- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "ON"
|
|||
-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
|
|||
-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
|
|||
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
|
|||
-- Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
|
|||
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
|
|||
-- Retrieval info: USED_PORT: c1 0 0 0 0 OUTPUT_CLK_EXT VCC "c1"
|
|||
-- Retrieval info: USED_PORT: c2 0 0 0 0 OUTPUT_CLK_EXT VCC "c2"
|
|||
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
|
|||
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
|
|||
-- Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
|
|||
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
|
|||
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
|
|||
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
|
|||
-- Retrieval info: CONNECT: c1 0 0 0 0 @clk 0 0 1 1
|
|||
-- Retrieval info: CONNECT: c2 0 0 0 0 @clk 0 0 1 2
|
|||
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc.vhd TRUE
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc.ppf TRUE
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc.inc FALSE
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc.cmp TRUE
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc.bsf FALSE
|
|||
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_ntsc_inst.vhd FALSE
|
|||
-- Retrieval info: LIB_FILE: altera_mf
|
|||
-- Retrieval info: CBX_MODULE_PREFIX: ON
|