Activity

From 10/28/2017 to 11/26/2017

ST 12:28 AM Feature #3: High resolution antic support: Hoping to get back to being able to test out this new stuff real soon! I'm finally finishing up a major vehicle repair which has been keeping my tied up since mid April. I'll have it back on the road by end of day tomorrow.
Stephen

FO 09:38 PM Feature #3: High resolution antic support: gr.8 seems to be off by half a colour clock in 4x mode. Wonder if that is gtia or antic. Didn't notice that in gr.0 foft
FO 09:26 PM Feature #3: High resolution antic support: I think I have the antic alignment all working. Next up, gtia... foft

91 02:46 AM Feature #3: High resolution antic support: Keep up the good work, thank you for all the time you are putting into this! 917k

FO 09:15 PM Feature #3: High resolution antic support: Example output from sim. I display ctrl F and ctrl G at the start and end of a line - to check alignment. I switch colour clock multiplier after two mode 2 lines.
!colour_clock_offsets.png!
So some issues...
i) background colour s... foft

FO 09:43 PM Feature #3: High resolution antic support: I added rendering of the video output ot the test bench... Very helpful to debug visual video issues. foft

FO 09:57 PM Feature #3: High resolution antic support: Back to computing the dma clock start cycle, rather than applying hscrol high bits as a delay. With 2x and 4x support still though.
Next up, need to sort out the output timing to be aligned with the displayed area... Then onto some gti... foft

FO 10:10 PM Feature #3: High resolution antic support: Thinking about this I bet I just broke the hscrol change delay, since this will no longer allow late changes. One to think about... foft
FO 10:09 PM Feature #3: High resolution antic support: Fixed issue with sprites - I had changed hscrol to count at 4x original colour clock and forgot to adjust the dma address by 2 bits as well.
Made hscrol work as a colour clock delay, which should fix highres scrolling. foft

FO 10:15 PM Feature #3: High resolution antic support: Sped up the refresh cycles to 2x and 4x. No missing characters now mid-screen. However this will probably flicker on SDRAM, since its shorter than a real refresh cycle iirc.
Took a look at hscrol. Understand what needs doing but too t... foft
FO 10:11 PM High res support (WIP): *I have high-res mode working!* More debugging to do, but I've uploaded a preview for anyone who wants to play with it.
Here is a video showing graphics 0 in 80 column and 160 column mode - I should have used HD!
[[https://www.youtub... foft

FO 09:53 PM Feature #3: High resolution antic support: Fixed a few more bugs and tried it again. Was starting to despair that it worked on sim but not the real hardware. Then I selected 2x CPU mode - and it worked! Of course I'm blocking most of the cycle to wait for PBI in 1x mode, doh. So ... foft

FO 09:28 PM Feature #3: High resolution antic support: I fixed the dma clock, then I found character fetching was not working either. I've fixed that for 2x, but still remains broken for 4x. Doing a build to see if I'm right on 2x:-) foft

FO 12:42 PM Feature #3 (In Progress): High resolution antic support: Taking a look at this one for a change!
Its actually not looking too bad, at least the first bug. I start off the dma clock as usual and the first tick happens to early (due to faster colour clock). Then it ends up not stopping the DM... foft

SA 09:29 PM Bug #54: GTIA issue when Turbo > 4X: foft wrote:
> I noticed that on the v16 core with the OS in block ram (vs sdram) up to 16x works ok. But 32x has the artifacts.
:-) This mean progress!
sadosp
FO 07:33 PM Bug #54: GTIA issue when Turbo > 4X: I noticed that on the v16 core with the OS in block ram (vs sdram) up to 16x works ok. But 32x has the artifacts. foft

Also available in: Atom

EclaireXL