EclaireXL

04/04/2017

09:12 PM Feature #10 (Closed): Set up email in redmine

foft

09:12 PM Bug #9: Fix svn repository

via redmine... foft

09:11 PM Bug #9 (Rejected): Fix svn repository

Repository is not working foft

09:08 PM Feature #8 (Closed): Implement 4 channel ADC

The one channel ADC on the v1 board is replaced by a four channel one on the v2 board.
Modify the implementation t... admin

09:07 PM Feature #7 (New): Implement I2C vga/hdmi support

Try the I2C support on the new board.
Initially for presence detection
Latest for checking modes
Its via a mu... admin

09:06 PM Bug #6 (Closed): HDMI audio poor quality

I removed a low division in the audio output to meet timing. I suspect this should be replaced with a proper low pass... admin

09:05 PM Bug #5 (Closed): SIDE2 does not work

SIDE1 works fine, but SIDE2 does not work. I contacted Sebastian and he kindly send me some details. Need to look int... admin

08:51 PM Bug #4 (Closed): Galaxian flickers on scrolling - when using real cartridge

Galaxian flickers on scrolling when using a real cartridge. This does not happen when using the virtual cartridge.
... foft

08:48 PM Feature #3 (New): High resolution antic support

DMACTL bit 5 is normally playfield dma on.
In the core bit 6 is also supported to allow
10 - 2x colour clock - al... foft

08:45 PM Feature #2 (Closed): PBI support

Implement PBI support:
Done:
PBI_A
PBI_D
PBI_CLK
PBI_RW_N
PBI_IRQ_N
PBI_RST_N
High priority:
PBI_EX... foft

08:30 PM Feature #1: Svideo sync line support

A comment foft

08:20 PM Feature #1 (Closed): Svideo sync line support

Doesn't look too hard to change. In the svideo component they do this for luma:
luma = (84*R+164*G+32*B + 58880)/5... admin

08:24 PM Board ordered

We've ordered the boards from the PCB manufacturer! admin