EclaireXL

Add pull-ups on triggers(gtia has internal pull-up). Improve colour resolution.

Added new style 32KB roms

Mistification from slingshot, many many many thanks!

Add spi clk

Reset ps2 after pll change in case of stuck keys

Missing cof file, meant no arg file created for the release

irq 1 should not be masked

Make acid test pass again, while still having fujinet work

Missed signals

Added sychronizer to pia

Scaler fix

Correct edge bit. Also interrupt 1 should still work in output mode.

Remove reset of hdmi on atari reset

Register mux output to meet timing (well, closer) on the hdmi. Remove reset of hdmi on reset, as on v2

Split inout into in and out for i2c, better for internal use in fpga

Split inout into in and out for i2c, better for internal use in fpga

SDC file correction for v1

I2C registers, for the scaler config

Add area scaler to A2 v1 and v3 boards. Add both scalers to the A4 v3 board.

A4 has room for both scalers

Few missing parts from scaler support for v2

Updated sdc for new clocks

Added videomodes to the jic

DVI mode support: 480i/576i/720p and 1080i

Add video mode rom to flash