Fix for hscrol and mode 8
Direct mode for control by usb firmware. Added mapping for 2nd, 3rd and 4th keypads. 2nd is on f4 to f6 etc, 3rd is as 1st but with control. 4th is as 2nd but with control.
Added 5200 mcc builds
Added USB support
Added usb polling
Connect some signals used by svideo
Add RGB builds without composite sync - for people with external sync combining hardware confused by composite sync
Changed from SVIDEO to COMPOSITE
5200 core port to mcctv/mcc216
MCC 5200 firmware
MCC controller custom mapping
Share the USB PS2 override logic. Wire up USB to controllers on the MCC216
Missing entry in process sensitivity list
Capture SIO commands using a hardware state machine - too time critical to easily merge with USB polling otherwise (without much code refactoring...). Now drive emulation works on MCCTV with USB:)
Removed old usb hardware
Removed old usb pll
TODO: make ps2_to_atari800 support direct feed, not via ps2
start of USB support - ram timing issue fixed
USB support - larger rom/ram support
mcctv/mcc216 larger rom for usb
USB now working, feeding events to core. Still some bugs remaining - such as clash with drive emulation.
Fixed warning
New mode for full OS and no basic rom
Fixes to make this build into ZPU firmware
Untested support for usbhostslave from opencores. Based on working usb code in mist.
Ditto
Typo
Instantiate USB host. Next need to wire to ZPU, then make ZPU firmware talk to some USB devices via this...
Added keyboard control of menu
USB host from opencores - lgpl
key control in menu (if connected in core...)
key control in menu. escape to exit
Press windows key to toggle paddle mode. Press alt to toggle scanlines.
Output the next key state, so I can easily trigger on random keypresses
Reverse pot direction
Added reverse option. Yes, pots are a different direction from cx52!! 2600daptor vs 5200daptor
Working on high-res fixes - not yet complete, but still passes acid
Fix shift. I hope this is correct now for both platforms... the pokey.pdf misses some details.
Do not clear 2nd pokey - we only have one so this wipes that out...
Removed delay
Added file to project
Better support for cartridges on 5200
Better cartridge support for 5200
Fix pitfall. Was only getting 2/3 values for keycode... My previous implementation seems to match the pokey datasheet but I guess not...
Changed from pullup to pulldown on unused bus locations on 5200
Only hold break, shift or control when those keys are being scanned
Connected PAL signal to scandoubler to allow NTSC palette
Connect pal siganl to scandoubler - to allow ntsc palette
Connect pal signal to scandoubler - to allow ntsc palette
Paddle on mist a800. Added NTSC palette. Added support for 4k and 8k roms to 5200 - need to wire up to cartlogic really...
Fixed build error
Firmware changed from using atari5200 to atar5200 - only have 8 characters!
sd emulation fix - thanks Till
use atari5200 as directory
Use atari5200 as sd card directory
Corrected device. Now complaining about one of the spi pins
Applying a few interface/file changes
Make sures its named 5200 throughout
New one stable now pll fixed - deleting old interface version
Made sure its 5200 throughout
Made the sdcard one the main one - should be stable now with pll fix
Fixed pll - its important that the ps2 clock is in sync - i.e. integral factor - with the system clock...
Fix button mappings
Some 5200 fixes, reverted to data_io mist interface
svn doing stupid stuff
sd card version - not working, reverting main version to data_io
Changed to some empirical values that work better with 5200 daptor...
First 5200 stick now working - at least joystick + keypad
SD card fixes, due to how spi_master released cs_n during command. Thanks Till!
Pass s4_n,s5_n and cctl_n through 6502 timing adaptor. Only accept request at start of cycle.
Started to connect up 5200 joystick. On mist this will work with keyboard + analog stick, or 5200daptor
Patches from Hias. Fix timing to allow The!Cart to work. Start of PBI work.
Switched mist_5200 to use sd card emulation. NB SD cart emulation does not work yet with this core, but problem identified and Till will be fixing. Thanks Till!
Switched to new mmc code a while back, removing old
Add a newline, in case there is not a newline at the end of the file
These were cross connected - no idea why it was building. SD init gets further now, but still no dice.
As discussed with Till - these were taken under Lesser
Changed mist to use simulated sd card, rather than the custom protocol
Upgraded to latest version of Peter Wendrichs core. Thanks Peter!
Fix replay build
Fix PIA store. Checked freezer source, it expects it
Allow delete or scroll lock. I found scroll lock did not work on my mist - perhaps my kb
Merged turbo freezer support from Hias. Working pretty well. PIA freezing not working yet though, so no joystick after freeze. Scoll lock to freeze.
Added some glue to talk to 6502 style bus with phi1/phi2 etc. Connected to GPIO including phi2 out. VBXE carts not running more reliably. In theory other carts such as The!Cart etc should work now, need to test...
Added mcctv notes
Smaller firmware, thanks to Hias
Applied patches form Hias - mostly make the firmware smaller. 0001-firmware-read-cartridge-data-in-a-single-chunk. 0002-firmware-get-rid-of-regs.c-this-saves-some-300-bytes 0003-firmware-get-rid-of-libgcc-for-a800-firmware-build
To LGPL as discussed
Needs some updates, but made a start...
Remove extra copyright files
Added cartridge instructions
Missing .. for 5200 build
Point cartridges at user dir, rather than os rom dir
Added mcctv and 5200 builds
Merged in first cut cartridge emulation support from Hias. Excellent:-)
Ooops... Accidentally commented cart loading on commit!