Project

General

Profile

Activity

From 06/21/2019 to 07/20/2019

07/19/2019

10:22 PM Turbo in vblank only
Doing another build with turbo in vblank only, press fire on cpu speed selection. So many (not all) things with tight... foft
10:13 PM Revision 934: Use version for Eclaire, others to 99 for now
markw
10:12 PM Revision 933: Turbo in vlbank only for chameleon 1/2, mcc216, mcctv
markw
10:09 PM Revision 932: vlbank only turbo for mist
markw
10:01 PM Revision 931: VBLANK only turbo mode, better demo compatibility but clearly slower
markw
10:01 PM Revision 930: VBLANK only turbo mode, better demo compatibility but clearly slower
markw
10:00 PM Revision 929: VBLANK only turbo mode, better demo compatibility but clearly slower
markw
09:59 PM Revision 928: gtia version of svideo
markw
09:39 PM Revision 927: Make it more explicit
markw
09:16 PM Revision 926: Corrected issue with disk/drive selection, basically only drive 1 worked, oops!
markw

07/13/2019

10:50 PM Backported more features
mist/mcctv/mcc216: pll switching, gtia based svideo, profile support (put sdflash.bin in roms)
all: fixed reset on ....
foft

07/12/2019

10:13 PM Revision 925: Two versions only: NTSC and NTSC_CS (forced composite sync)
markw

07/09/2019

11:19 PM Revision 924: I need this on for my monitor, perhaps it should be an option again?
markw
11:17 PM Revision 923: Remove empty files
markw
08:38 PM Revision 922: Latest fixes from György for 5200 mist
markw
08:32 PM Revision 921: Added pll reconfiguration to mcc216. Updated firmware to version with sd card profi...
markw
08:32 PM Revision 920: Added pll reconfiguration to mcc216. Updated firmware to version with sd card profi...
markw

07/08/2019

11:32 PM Revision 919: Added pll reconfiguration to mist. Updated firmware to version with sd card profiles.
markw
11:32 PM Revision 918: Added pll reconfiguration to mist. Updated firmware to version with sd card profiles.
markw

07/07/2019

09:29 AM Revision 917: version only
markw
09:28 AM Revision 916: PAL/NTSC switching, switched to direct composite output component, profile support
markw
09:25 AM Revision 915: SD card flash emulation (profiles). Fix cartridge reboot. Some early (unfinished) d...
markw
09:22 AM Revision 914: Added some individual sync settings
markw
08:35 AM Revision 913: Fake flash via sd card
markw

07/02/2019

10:53 PM Feature #76: Merge down to trunk
Last thing to finish up this mcctv version is to make profiles work on the sdcard I guess, one for another day. foft
10:52 PM Feature #76: Merge down to trunk
Wired up svideo_gtia while I'm at it (i.e. direct palette to svideo, rather than via rgb), looks a bit better... Was ... foft

06/30/2019

07:41 PM Feature #76: Merge down to trunk
PAL/NTSC switching canned test is working on mcctv:-) foft

06/27/2019

10:37 PM Feature #76: Merge down to trunk
reset to put back original settings does not crash, but does not put back settings! foft
10:33 PM Feature #76: Merge down to trunk
OK, don't think it was that.
Wrote a much better state machine, configure pll 1 while pll 2 is in reset, wait for ...
foft

06/26/2019

10:52 PM Feature #76: Merge down to trunk
Results are in, think its sync between the clocks foft
10:11 PM Feature #76: Merge down to trunk
Freezing/restarting all the clocks with my state machine works just fine. I wonder if the reconfig somehow destroys t... foft
10:08 PM Feature #76: Merge down to trunk
So near and yet so far... Re-configures and still have ready screen at slightly different frequency. But ZPU and 6502... foft

06/24/2019

11:07 PM Feature #76: Merge down to trunk
Trying to get pll switching working on other boards (different ip than on cyclone v)... foft

06/22/2019

11:24 PM Backports of EclaireXL features
I've back-ported a bunch of the EclaireXL features to the mist, mcc216, mcctv and chameleon.
New core chameleon2.
...
foft
11:21 PM Feature #76: Merge down to trunk
Released a first cut of them here http://www.64kib.com/autobuild/20190622/
See http://www.64kib.com/autobuild/change...
foft
09:59 PM Feature #76: Merge down to trunk
That is really the main existing boards that worked well. Might do a release build with this state.
After which th...
foft
09:50 PM Feature #76: Merge down to trunk
mist 800xl is working. Skipping mist 5200 since it has been converted into a zpu-free core by György foft
09:06 PM Feature #76: Merge down to trunk
mcctv 800xl and 5200 working foft
10:18 PM Revision 912: Bumped firmware
markw
10:12 PM Revision 911: Updated version and firmware
markw
10:11 PM Revision 910: Turn off old variants
markw
10:09 PM Revision 909: Output atari keyboard, for use in menu
markw
10:08 PM Revision 908: Getting ready to release some core boards
markw
09:49 PM Revision 907: Get mist running
markw
09:06 PM Revision 906: Working with latest firmware
markw
08:57 PM Revision 905: Do not display tv standard when not connected, not wired up!
markw
08:13 PM Revision 904: Got MCCTV 800 core working with new firmware
markw

06/21/2019

10:31 PM Feature #76: Merge down to trunk
mcc_5200 seems fine (minimal changes here). Next up mcctv... Tried to merge diff and quite a lot of failed hunks, wil... foft
08:20 PM Feature #76: Merge down to trunk
Saved some memory in USB and also saved some memory by disabling flash. Now fits in 36K on MCC, with a little space. ... foft
10:04 PM Revision 903: Switch mcc216_5200 to eclaire firmware branch. Seems to work (after sd_detect), not...
markw
09:46 PM Revision 902: mcc216_5200
markw
09:15 PM Revision 901: mcc216 working pretty well
markw
09:11 PM Revision 900: mcc216 working pretty well
markw
08:18 PM Revision 899: Remove flash support from MCC, saves more space and not going to implement it here
markw
08:04 PM Revision 898: Some memory reductions to allow it to fit in 36K, for mcc
markw
08:03 PM Revision 897: Some memory reductions to allow it to fit in 36K, for mcc
markw
 

Also available in: Atom