Project

General

Profile

Activity

From 04/06/2017 to 05/05/2017

05/04/2017

09:25 PM Feature #13: 32x speed cpu without wait states
Nope, this is not going to be so simple... Massive timing violations. foft

05/03/2017

08:27 PM Missing parts
Panos is waiting for the last few remaining parts to arrive. Most notably the FT232 USB chip. We're expecting they wi... foft

05/02/2017

10:15 PM Feature #14: Svideo core for first prototype
Debugged in isim to get lots of overflow/underflow/blanking/burst incorrect cases!
Added colour bars and asserts for...
foft
06:40 AM Feature #14: Svideo core for first prototype
Scaled luma with 64 space for chroma - when in composite mode only. No point throwing away svideo brightness.
Adde...
foft
06:38 AM Sub PCB - now populated!
!sub-board-pop.jpg! foft

04/30/2017

09:06 PM Sub-board
Here is the first picture of a sub-board, which also arrived in Greece. None completed yet but all the parts fit - an... foft
09:01 PM Video DAC regulator patch
Here is a picture of the patch Panos has skillfully applied to the boards.
!patch.jpg!
foft
08:58 PM Boards received
The boards arrived in Greece. Panos is in the process of adding some final parts and trying them out.
Some good n...
foft

04/26/2017

11:43 PM Document: Eclaire XL v1.0 Board Spec
Eclaire XL v1.0 Board Spec sadosp
11:43 PM Eclaire XL v1.0.jpg
sadosp
11:43 PM Eclaire XL v1.0 b.JPG
sadosp
11:42 PM Eclaire XL v1.0 Spec.odt
sadosp
11:42 PM Eclaire XL v1.0 Spec.jpg
sadosp
08:54 PM Feature #14: Svideo core for first prototype
Setting this up in the simulator so I can understand chroma better.
The problem seems to be that I've used all the...
foft
08:51 PM Feature #13: 32x speed cpu without wait states
I have something working on the simulator - alone. Now need to plug it into the core proper to see if it works. Will ... foft

04/24/2017

10:14 PM Feature #14: Svideo core for first prototype
Should add that this should not be done for direct chroma output for svideo... Since that is still on a 0-0.7V DAC ou... foft
10:14 PM Feature #14: Svideo core for first prototype
Panos tried out a new core with composite only - on green using the sync pin. Looks brighter but just black and white... foft
07:58 PM Feature #14 (Closed): Svideo core for first prototype
Waiting the Chinese sun to rising, I decide to proceed with the "video mod" of our v 1.0 board. So I desolder the "vs... foft
07:56 PM Pictures!
The PCB company sent us an initial picture!
!v3board_small.jpg!
foft

04/18/2017

10:19 PM Delays
We received an update from the PCB company. Unfortunately it wasn't to say 'shipping' as we'd hoped.
Instead they...
foft

04/12/2017

10:07 PM Feature #13 (In Progress): 32x speed cpu without wait states
Trying simply feeding in the clock at twice the speed to see if it passes timing! foft

04/11/2017

09:46 PM Feature #1: Svideo sync line support
admin wrote:
> Doesn't look too hard to change. In the svideo component they do this for luma:
>
> luma = (84*R+1...
sadosp
08:35 PM Feature #1 (Resolved): Svideo sync line support
Implemented in test core, probably will need some debugging... foft

04/08/2017

08:08 PM Feature #13 (New): 32x speed cpu without wait states
The whole system is clocked at 32*original clock. However the 6502 turbo is limited to 16x due to the ram speed, sinc... foft

04/07/2017

09:37 PM Feature #2 (In Progress): PBI support
foft
08:57 PM Feature #12 (In Progress): Set up redmine backups!
Adding svn backups too while at it.
Need to do these to the raid instead of to another local disk though really...
foft
08:41 PM Feature #12: Set up redmine backups!
Added file backups
Both these are as crons under postgres_backup user
foft
08:23 PM Feature #12: Set up redmine backups!
Added postgres backups.
TODO: verify it runs from cron ok
foft
07:53 PM Bug #9 (Rejected): Fix svn repository
Decided to just disable this - its complicated enough anyway an the svn can already be checked out or browsed. foft
07:45 PM Feature #10 (Closed): Set up email in redmine
Found password, set up config and tested ok. foft
06:59 PM Parts arriving monday
Sent on:9:04 amFrom:Eric Wu
hi Panos
THE COMPONENTS WILL COME HERE ON MONDAY
THEN START to fabricate
about 3-4day...
foft

04/06/2017

05:59 AM Document: MHero S R ext JTAG installation - v1 prototype
sadosp
05:57 AM JTAG External Guide.odt
MHero S R ext JTAG installation - v1 prototype sadosp
05:56 AM Document: eclaire XL HW Spec - v1 prototype
sadosp
05:56 AM eclaire XL HW Specifications - v1 proto.txt
eclaire XL HW Spec - v1 prototype sadosp
05:52 AM Document: Atari 800 User Manual Generic
sadosp
05:51 AM Atari 800 FPGA Manual.pdf
Atari 800 FPGA User Manual Generic sadosp
05:49 AM eclaire XL new v1.0.sch
Main Board schema sadosp
05:49 AM eclaire XL new v1.0.brd
Main Board pcb sadosp
 

Also available in: Atom