Project

General

Profile

Activity

From 03/10/2017 to 04/08/2017

04/08/2017

08:08 PM Feature #13 (New): 32x speed cpu without wait states
The whole system is clocked at 32*original clock. However the 6502 turbo is limited to 16x due to the ram speed, sinc... foft

04/07/2017

09:37 PM Feature #2 (In Progress): PBI support
foft
08:57 PM Feature #12 (In Progress): Set up redmine backups!
Adding svn backups too while at it.
Need to do these to the raid instead of to another local disk though really...
foft
08:41 PM Feature #12: Set up redmine backups!
Added file backups
Both these are as crons under postgres_backup user
foft
08:23 PM Feature #12: Set up redmine backups!
Added postgres backups.
TODO: verify it runs from cron ok
foft
07:53 PM Bug #9 (Rejected): Fix svn repository
Decided to just disable this - its complicated enough anyway an the svn can already be checked out or browsed. foft
07:45 PM Feature #10 (Closed): Set up email in redmine
Found password, set up config and tested ok. foft
06:59 PM Parts arriving monday
Sent on:9:04 amFrom:Eric Wu
hi Panos
THE COMPONENTS WILL COME HERE ON MONDAY
THEN START to fabricate
about 3-4day...
foft

04/06/2017

05:59 AM Document: MHero S R ext JTAG installation - v1 prototype
sadosp
05:57 AM JTAG External Guide.odt
MHero S R ext JTAG installation - v1 prototype sadosp
05:56 AM Document: eclaire XL HW Spec - v1 prototype
sadosp
05:56 AM eclaire XL HW Specifications - v1 proto.txt
eclaire XL HW Spec - v1 prototype sadosp
05:52 AM Document: Atari 800 User Manual Generic
sadosp
05:51 AM Atari 800 FPGA Manual.pdf
Atari 800 FPGA User Manual Generic sadosp
05:49 AM eclaire XL new v1.0.sch
Main Board schema sadosp
05:49 AM eclaire XL new v1.0.brd
Main Board pcb sadosp

04/05/2017

10:06 PM Feature #12 (Closed): Set up redmine backups!
Set up backups for this... foft
09:46 PM Sub PCB - ready
SUB BOARD
Techonology Finished Finished Time
MI (Manufacture Instruction) 2017/3/30 23:25:07
Board Cutting 2...
admin
09:13 PM Bug #9: Fix svn repository
Removed for now foft
09:12 PM Feature #10: Set up email in redmine
Need password! admin
09:09 PM Main PCB - ready!
Techonology Finished Finished Time
MI (Manufacture Instruction) 2017/4/1 21:45:19
Board Cutting 2017/4/1 21:5...
admin
08:34 PM JTAG External Guide (1).pdf
Add JTAG to external ports admin
08:34 PM Document: MHero S R installation instructions - v1 prototype
admin
08:33 PM ITX CASE Assembly Guide (3).pdf
admin
06:59 AM Feature #11 (New): Non-uk keyboard support (custom keyboard mapping)
Only a uk keyboard with stickers is supported right now.
Make this remappable via a file.
foft

04/04/2017

09:12 PM Feature #10 (Closed): Set up email in redmine
foft
09:12 PM Bug #9: Fix svn repository
via redmine... foft
09:11 PM Bug #9 (Rejected): Fix svn repository
Repository is not working foft
09:08 PM Feature #8 (Closed): Implement 4 channel ADC
The one channel ADC on the v1 board is replaced by a four channel one on the v2 board.
Modify the implementation t...
admin
09:07 PM Feature #7 (New): Implement I2C vga/hdmi support
Try the I2C support on the new board.
Initially for presence detection
Latest for checking modes
Its via a mu...
admin
09:06 PM Bug #6 (Closed): HDMI audio poor quality
I removed a low division in the audio output to meet timing. I suspect this should be replaced with a proper low pass... admin
09:05 PM Bug #5 (Closed): SIDE2 does not work
SIDE1 works fine, but SIDE2 does not work. I contacted Sebastian and he kindly send me some details. Need to look int... admin
08:51 PM Bug #4 (Closed): Galaxian flickers on scrolling - when using real cartridge
Galaxian flickers on scrolling when using a real cartridge. This does not happen when using the virtual cartridge.
...
foft
08:48 PM Feature #3 (New): High resolution antic support
DMACTL bit 5 is normally playfield dma on.
In the core bit 6 is also supported to allow
10 - 2x colour clock - al...
foft
08:45 PM Feature #2 (Closed): PBI support
Implement PBI support:
Done:
PBI_A
PBI_D
PBI_CLK
PBI_RW_N
PBI_IRQ_N
PBI_RST_N
High priority:
PBI_EX...
foft
08:30 PM Feature #1: Svideo sync line support
A comment foft
08:20 PM Feature #1 (Closed): Svideo sync line support
Doesn't look too hard to change. In the svideo component they do this for luma:
luma = (84*R+164*G+32*B + 58880)/5...
admin
08:24 PM Board ordered
We've ordered the boards from the PCB manufacturer! admin
 

Also available in: Atom