EclaireXL

04/13/2014

10:38 PM Revision 17 (repo2): Removed unused file

markw

10:37 PM Revision 16 (repo2): Wired up mist with internal ram/rom. Tested OK.

markw

08:34 PM Revision 15 (repo2): Wired up helloworld example to mcc216. Works!

markw

08:33 PM Revision 14 (repo2): Remove these, they are now common components.

markw

08:32 PM Revision 13 (repo2): Expose pots, lightpen. Fix joystick bit ordering comments.

markw

08:30 PM Revision 12 (repo2): added ps2_keys_reg to sensitivity list (was missing)

markw

08:30 PM Revision 11 (repo2): Split ROM into its own process, to make it easier for Quartus to infer

markw

08:29 PM Revision 10 (repo2): Split up into 2 sections. Quartus will not infer the ram block with it mixed

markw

08:29 PM Revision 9 (repo2): Clock pause by pokey enable, so its a fixed speed even if system clock 28MHz,57MHz or otherwise

markw

04/05/2014

10:01 PM Revision 8 (repo2): Renamed poly_* to pokey_poly_* since it is part of pokey

markw

09:54 PM Revision 7 (repo2): Cleaned up ZPU into slightly more generic form, though still clearly atari core targetted. Added inital tb, though needs rom to verify more. MIST sector side removed, but should be possible with external changes. Now ZPU instead has lots of GPIO.

markw

10:03 AM Revision 6 (repo2): Allow palette selection - with one option GTIA direct to allow external scandouble (with less memory)

markw

09:53 AM Revision 5 (repo2): Renamed sim script to match

markw

09:52 AM Revision 4 (repo2): Compiled/ran helloworld in sim. Appears fine...

markw

04/03/2014

09:50 PM Revision 3 (repo2): First cut at simple toplevel for the atari800xl - needs checking with isim...

markw

03/23/2014

09:49 PM Revision 2 (repo2): Make these generic to support Replay (28MHz) and the rest (57MHz)

markw

07:15 PM Revision 1 (repo2): Current unmerged vhdl for my Atari800 core and start at merging them into one tree with a common core

markw